Veröffentlichungen

Institut für Kunststofftechnik

Hier finden Sie die alle Veröffentlichungen des Instituts für Kunststofftechnik

  • ARMBRUSTER, D., BONTEN, C.: Materialentwicklung für Nullreflexionsoberflächen in Streulichtblenden, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • ARMBRUSTER, D., BONTEN, C.: Einsatz gefüllter Kunststoffe in neuartigen Elektromotorkonzepten, In: Jahresmagazin Kunststofftechnik, Jahresmagazin Kunststofftechnik.
  • BAUMGÄRTNER, F., BONTEN, C.: Influence of rheological characterization on modeling of volume retardation processes, In: International Conference on Humans and Technology: A Holistic and Symbiotic Approach to Sustainable Development ICHT 2022,
  • CELIK, A., WILLEMS, F., TÜZÜN, M., MARINOVA, S., HEYN, J., FIEDLER, M., BONTEN, C.: Compounding, Rheology and Numerical Simulation of Highly Filled Graphite Compounds for Potential Fuel Cell Applications, In: Polymers, Doi:10.3390/polym15122589. Polymers.
  • CHUNG, P.-L., KREUTZBRUCK, M.: Quantitative Bewertung von CT-Scan-Bilddaten von Faser-Kunststoff-Verbunden, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • CHUNG, P.-L., RITTMANN, J., KREUTZBRUCK, M.: Defekterkennung von Impactschäden durch convolutional neural networks, In: DGZfP, Hg. DACH-Jahrestagung 2023, Friedrichshafen, DGZfP-Berichtsband 180, ISBN 978-3-947971-29-9.
  • DREIER, J., BONTEN, C.: Hydrolysebeständigkeit von PLA, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • DREIER, J., BONTEN, C.: Wirkmechanismen in Schweißverbindungen amorpher Thermoplaste, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • EBERT, C., BONTEN, C.: Aufbereitung mittels Online-Rheometrie automatisieren, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • EHRLER, J., BERNHARDT, Y., KOHN, K.-U.: Defekte wie mit Fledermausohren hören, In: Kunststoffe, Kunststoffe.
  • EHRLER, J., BERNHARDT, Y., KOHN, K.-U.: Listening to Defects with Bat Ears, In: Kunststoffe international, Kunststoffe international.
  • EHRLER, J., KORNELY, M., KATTINGER, J., KREUTZBRUCK, M., BONTEN, C.: Untersuchung des Fließverhaltens von Kunststoffen im Hotend eines Extruders für den 3D-Druck mittels Röntgendurchstrahlung, In: Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V., Hg. DGZfP-Jahrestagung 2023, ISBN 978-3-947971-25-1.
  • EHRLER, J., KORNELY, M., KATTINGER, J., KREUTZBRUCK, M., BONTEN, C.: CT-Analysis of the Melting Area in the Fused Filament Fabrication Process, In: Papers of the ECNDT 2023. Research and Review Journal of Nondestructive Testing, Doi:10.58286/28063. Papers of the ECNDT 2023. Research and Review Journal of Nondestructive Testing.
  • EHRLER, J., KREUTZBRUCK, M.: Digitalisierung der Ultraschallprüfung mittels optischem Tracking von Prüfköpfen, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • HUFERT, J., GREBHARDT, A., SCHNEIDER, Y., BONTEN, C., SCHMAUDER, S.: Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers: PLA, PBAT, and Blends, In: Polymers, Doi:10.3390/polym15020389. Polymers.
  • HUFERT, J., KREUTZBRUCK, M.: Maßgeschneiderte Hochfrequenz-Wirbelstromsonden zur Kohlenstofffaserdetektion, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • JOHANN, K.S., BONTEN, C.: Schneller als die Polizei erlaubt: Feststoffförderung von Polyolefinen in Nutbuchsenextrudern, In: Kunststoffe, Kunststoffe.
  • JOHANN, K.S., BONTEN, C.: 3D-Druck mit thermotropen flüssigkristallinen Polymeren, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • JOHANN, K.S., REIßING, A., BONTEN, C.: Feststoffförderung von genuteten High-Speed-Einschneckenextrudern, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KAISER, J., MÜLLER, D., BONTEN, C.: Umgebungsbedingte Einflussfaktoren auf das Langzeitverhalten hochgefüllter, leitfähiger Kunststoffbauteile, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KATTINGER, J., STEHLE, H., BONTEN, C.: Experimentelle Untersuchung und Modellierung des Verzugsverhaltens beim Digital Light Processing, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KATTINGER, J., BONTEN, C.: Simulation der Strömung innerhalb der Düse beim Strangablegeverfahren, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KLIS, L., BONTEN, C.: Untersuchungen zur Polymerisationsreaktion von Caprolactam zu Polyamid 6, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KLIS, L., REINDL, T., KREUTZBRUCK, M.: Verbindung eines FKV/Metall-Hybridbauteils, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KORNELY, M., EHRLER, J., KATTINGER, J., KREUTZBRUCK, M., BONTEN, C.: CT-Analyse des Aufschmelzbereichs im Strangablegeverfahren, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • KORNELY, M., EHRLER, J., PHILIPP, J., STAMMEN, E., DILGER, K., KREUTZBRUCK, M.: Investigation of Kissing Bonds in Adhesive Joints, In: Research and Review Journal of Nondestructive Testing, Doi:10.58286/28226. Research and Review Journal of Nondestructive Testing.
  • KORNELY, M., PHILIPP, J., EHRLER, J., JENNERJAHN, I., SOLODOV, I., KREUTZBRUCK, M.: Einsatz von nichtlinearem Ultraschall zur Detektion von Adhäsionsfehlern (KissingBonds), In: Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V., Hg. DGZfP-Jahrestagung 2023, ISBN 978-3-947971-25-1.
  • KORNELY, M., SOLODOV, I., PHILIPP, J., STAMMEN, E., DILGER, K.: Detektion von Anhaftungsfehlern in Klebverbindungen, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • LAJEWSKI, S., BONTEN, C.: Entwicklung eines biobasierten und biologisch abbaubaren, wasserlöslichen Stützstrukturwerkstoffs, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • LAJEWSKI, S., BONTEN, C.: Thermische Stabilisierung von PHB mittels reaktiver Extrusion, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • LITTNER, L., BERNHARDT, Y., KUNTZE, E., PROTZ, R., KREUTZBRUCK, M., GUDE, M.: Fließfrontendetektion im Hochdruck-RTM-Prozess, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • LUPLOW, T., PROTZ, R., LITTNER, L., DRUMMER, J., KUNZE, E., HEIMBS, S., HORST, P., GUDE, M., KREUTZBRUCK, M., FIEDLER, B.: Herausforderungen dickwandiger, duroplastischer Faser-Kunststoff-Verbunde in der Herstellung sowie mechanischen und zerstörungsfreien Prüfung - Ein Review, In: Zeitschrift Kunststofftechnik, Doi:10.3139/O999.02022023. Zeitschrift Kunststofftechnik.
  • MATZERATH, T., SCHNEIDER, F., BONTEN, C.: Bewertung dispersiver Mischvorgänge in der Einschneckenextrusion, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • MÖRK, T., BONTEN, C.: Thermoformen hochgefüllter Kunststoffe, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • MOSTOVENKO, I., SCHAIBLE, T., BONTEN, C.: Scher- und Dehndeformationen in gefüllten Kunststoffschmelzen, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • MÜLLER, , SCHOLPP, M., BONTEN, C.: Kombinierter Thermoform- und Schweißprozess, In: C. BONTEN und M. KREUTZBRUCK, Hg. 28. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • MÜLLER, D., KAISER, J., BONTEN, C.: Schweißnahtqualität beim Twin-Sheet-Thermoformen, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • RATKA, M., CELIK, A., BONTEN, C.: Wissen, was im Doppelschneckenextruder passiert, In: Kunststoffe, Kunststoffe.
  • RATKA, M., KAISER, J., CELIK, A., BONTEN, C.: Untersuchung der Feststoffförderung in Doppelschneckenextrudern mittels Diskreter Elemente Methode, In: Technische Universität Chemnitz, Hg. Technomer 2023, ISBN 978-3-939382-16-4.
  • REINDL, T., GUTBROD, F., BONTEN, C.: Kombinierter Thermoform- und 3D-Druckprozess, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • REINDL, T., SCHELL, F., KREUTZBRUCK, M.: Sortenreine Sortierung additivierter Kunststoffe mittels THz-Spektroskopie, In: DGZfP, Hg. DACH-Jahrestagung 2023, Friedrichshafen, DGZfP-Berichtsband 180, 2023, S. 1–12. ISBN 978-3-947971-29-9.
  • REINDL, T., BERNHARDT, Y., KOHN, K.-U., KREUTZBRUCK, M.: Phased-Array Approach to Air-coupled Ultrasound with Resonant Defect Excitation, In: Research and Review Journal of Nondestructive Testing, Doi:10.58286/28087. Research and Review Journal of Nondestructive Testing.
  • REINDL, T., SCHMOHL, L., WOLF, M., EYMAEL, T., BONTEN, C., VERL, A.: Upcycling von Thermoformabfällen, In: Kunststoffe, Kunststoffe.
  • REITINGER, P., BEISSER, S., BONTEN, C.: Konturnah temperiertes, additiv gefertigtes Extrusionswerkzeug, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • REITINGER, P., WALCZAK, M., BONTEN, C.: Wandgleiteffekte bei der Verarbeitung von Kunststoffen, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • RESCH, J., BONTEN, C.: Neue Polymerverarbeitungsadditive für die Extrusion, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • RITTMANN, J., HUFERT, J., KREUTZBRUCK, M.: Anwendung einer neuartigen Lockin-Thermografie Kompensationsmethode zur Eliminierung der lateralen Wärmeflüsse, In: DGZfP, Hg. DACH-Jahrestagung 2023, Friedrichshafen, DGZfP-Berichtsband 180, 2023, S. 1–10. ISBN 978-3-947971-29-9.
  • RITTMANN, J., KREUTZBRUCK, M.: 3D-Thermografie mittels künstlicher Intelligenz, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • RITTMANN, J., KREUTZBRUCK, M.: Grenzen und Möglichkeiten der 3D-Thermografie innerer Strukturen mittels künstlicher Intelligenz, In: DGZfP, Hg. DACH-Jahrestagung 2023, Friedrichshafen, DGZfP-Berichtsband 180, ISBN 978-3-947971-29-9.
  • RITTMANN, J., KREUTZBRUCK, M.: Lockin-Thermografie mit Eliminierung der lateralen Wärmeflüsse, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • RUSKO, A.-C., BONTEN, C.: Thermo-oxidatives Verhalten von Polyethylenfuranoat (PEF), In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • SCHAIBLE, T., BONTEN, C.: Elongational viscosity analysis and modeling of a modified polylactide for foaming applications, In: Proceedings of the 36th Conference of the Polymer Processing Society PPS36,
  • SCHNEIDER, Y., GUSKI, V., SAHIN, A.O., SCHMAUDER, S., KADKHODAPOUR, J., HUFERT, J., GREBHARDT, A., BONTEN, C.: Investigation of Auxetic Structural Deformation Behavior of PBAT Polymers Using Process and Finite Element Simulation, In: Polymers, Doi:10.3390/polym15143142. Polymers.
  • SCHNEIDER, Y., GUSKI, V., SCHMAUDER, S., KADKHODAPOUR, J., HUFERT, J., GREBHARDT, A., BONTEN, C.: Deformation Behavior Investigation of Auxetic Structure Made of Poly(butylene adipate-co-terephthalate) Biopolymers Using Finite Element Method, In: Polymers, Doi:10.3390/polym15071792. Polymers.
  • SEDLATSCHEK, S., BAUMGÄRTNER, F., BONTEN, C.: Einfluss des Retardationszeitspektrums auf die Schwindungsvorhersage amorpher Thermoplaste, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • SEITZ, M., RIHM, R., BONTEN, C.: Faserverstärkte und stabilisierte PHBV-Compounds, In: C. BONTEN und M. KREUTZBRUCK, Hg. Stuttgarter Kunststoffkolloquium, 2023. ISBN 978-3-9818681-3-5.
  • SOLODOV, I., KORNELY, M., PHILIPP, J., STAMMEN, E., DILGER, K., KREUTZBRUCK, M.: Linear vs nonlinear ultrasonic testing of kissing bonds in adhesive joints, In: Ultrasonics, Doi:10.1016/j.ultras.2023.106967. ISSN 1874-9968.
  • STRAUSS, S., WILHELM, F., SENZ, A., ENGELEN, H., BOYSEN, S., RILLI, N., CELIK, A., RATKA, M., BONTEN, C.: Experimental and Simulative Analysis of the Pressure Development in a Closed Injection Pultrusion Process with Multiple Chamber Geometries, In: Polymers, Doi:10.3390/polym15061544. Polymers.
  • TAHOUNI, Y., CHENG, T., LAJEWSKI, S., Benz, J., BONTEN, C., WOOD, D., MENGES, A.: Codesign of Biobased Cellulose-Filled Filaments and Mesostructures for 4D Printing Humidity Responsive Smart Structures, In: 3D printing and additive manufacturing, Doi:10.1089/3dp.2022.0061. 3D printing and additive manufacturing.
  • VERBÜCHELN, M., KLEIN, V., LIZAK, S., ASSIES, F., KÖHLER, S., THORENZ, A., HANSTEIN, S., VOGELSANG, M., MOSTOVENKO, I., SCHWEIZER, M.: Vermeidung, Substitution und nachhaltige Kreislaufwirtschaft von Kunststoffen, In: Impulse, Doi:10.34744/difu-impulse_2023-11. Impulse.
  • WEINMANN, S., PAGEL, S., BONTEN, C.: Recycling mit Wumms, In: Kunststoffe, Kunststoffe.
  • WEINMANN, S., PAGEL, S., BONTEN, C.: Recycling with Oomph, In: Plastics Insights, Plastics Insights.
  • BERNHARDT, Y.; KOHN, KAI-UWE; KREUTZBRUCK, M. (2022): Lokale Defektresonanz mittels akustischer Kamera im Hochfrequenzbereich. In: DGZfP-Jahrestagung 2022.
  • BERNHARDT, Y.; REINDL, T.; KREUTZBRUCK, M.; GRAMBERGER, T.: Frei positionierbare Dualroboteranlage zur Freiformprüfung großer Bauteile mittels luftgekoppeltem Ultraschall. In: DGZfP-Jahrestagung 2022.
  • BRÜMMER, FRANZ; SCHNEPF, UWE; RESCH, JULIA; JEMMALI, RAOUF; ABDI, RAHMA; KAMEL, HESHAM MOSTAFA et al. (2022): In situ laboratory for plastic degradation in the Red Sea. In: Scientific reports 12 (1), S. 11956. DOI: 10.1038/s41598-022-15310-7.
  • BRÜTTING, CHRISTIAN; DREIER, JULIA; BONTEN, CHRISTAN; ALTSTÄDT, VOLKER; RUCKDÄSCHEL, HOLGER (2022): Effect of Blend Composition on foaming behavior of biobased PLA-PHBV Blends. In: SPE Foams 2021. virtual, 13-16.9.2021. SPE Thermoplastic Materials and Foams Division, zuletzt geprüft am 18.05.2022.
  • CZICHOS, R.; BERNHARDT, Y.; DITTMANN, J.; MIDDENDORF, P.; KREUTZBRUCK, M. (2022): Experimental and numerical investigations on the micro-damage behaviour of glass fibre-reinforced plastics. In: Composites Part C: Open Access, S. 100341. DOI: 10.1016/j.jcomc.2022.100341.
  • EHRLER, JULIAN; KREUTZBRUCK, M.: Digitalisierung der UT-Prüfung mittels optischem Tracking von Ultraschallsonden. In: Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. (Hg.) 2022 - DGZFP JahrestagungDGZfP-Jahrestagung 2022.
  • HUFERT, J.; JOAS, S.; KREUTZBRUCK, M.: Maßgeschneiderte Hochfrequenz-Wirbelstromsonden zur Detektion von Kohlenstofffasern. In: Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. (Hg.) 2022 2. Fachseminar Wirbelstromprüfung
  • JOHANN, KAI S.; MEHLICH, STEPHAN; LAICHINGER, MARCUS; BONTEN, CHRISTIAN (2022): Experimental Investigation of the Solid Conveying Behavior of Smooth and Grooved Single-Screw Extruders at High Screw Speeds. In: Polymers 14 (5), S. 898. DOI: 10.3390/polym14050898.
  • JOHANN, KAI S.; REISSING, ADRIAN; BONTEN, CHRISTIAN (2022): Comparative Analysis of the Solid Conveying of Regrind, Virgin and Powdery Polyolefins in Single-Screw Extrusion. In: JMMP 6 (3), S. 56. DOI: 10.3390/jmmp6030056.
  • KORNELY, M.; EHRLER, JULIAN; KATTINGER, JULIAN; KREUTZBRUCK, M.: Untersuchung des Aufschmelzverhaltens im FFF-Druck mittels Durchstrahlprüfung. In: DGZfP-Jahrestagung 2022.
  • KORNELY, MIKE; PHILIPP, JENS; STAMMEN, ELISABETH; DILGER, KLAUS; KREUTZBRUCK, MARC (2022): Akustisches Verfahren zur Detektion von Anhaftungsfehlern. In: Adhäsion Kleben+Dichten (5), S. 38–44, zuletzt geprüft am 07.06.22.
  • MOSTOVENKO, IRINA; BENZ, JOHANNES; BONTEN, CHRISTAN; DÖRFLER, MELANIE; SCHULZE, CHRISTIAN (2022): Analysen zum Kunststoff im Restmüll der Stadt Augsburg. Potential für eine regionale Kreislaufwirtschaft? In: Müll und Abfall (1), S. 32–38. DOI: 10.37307/j.1863-9763.2022.01.
  • MOSTOVENKO, IRINA; BONTEN, CHRISTAN (2022): Leichtbau mit regionaler Pflanzenfaser. In: Kunstoffe (6), S. 78–81, zuletzt geprüft am 28.06.2022.
  • REINDL, T.; KORNELY, M.; KREUTZBRUCK, M.: Automatische Parameteranpassung im CT- Postprocessing zur Bestimmung der Faserorientierung in kurzglasfaserverstärkten Thermoplasten. In: DGZfP-Jahrestagung 2022.
  • RITTMANN, JOHANNES (2022): Defektcharakterisierung in faserverstärkten Kunststoffen mittels aktiver Thermografie und neuronalen Netzen. In: Zeitschrift Kunststofftechnik 1, S. 234–267. DOI: 10.3139/O999.01052022.
  • RITTMANN, JOHANNES; RAHAMMER, MARKUS; HOLTMANN, NIELS; KREUTZBRUCK, MARC (2022): A mobile nondestructive testing (NDT) system for fast detection of impact damage in fiber-reinforced plastics (FRP). In: Journal of sensors and sensor systems 9 (2020) (9), S. 43–50.
  • RITTMANN, J.; KREUTZBRUCK, M.: 3D-Thermografie innerer Strukturen mittels künstlicher Intelligenz. In: Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. (Hg.) 2022 – DGZfP-Jahrestagung 2022
  • SCHAIBLE, TOBIAS; BONTEN, CHRISTIAN (2022): In-line measurement and modeling of temperature, pressure, and blowing agent dependent viscosity of polymer melts. In: Applied Rheology 32 (1), S. 69–82. DOI: 10.1515/arh-2022-0123.
  • SCHÖPFER, LION; MÖLLER, JULIA N.; STEINER, THOMAS; SCHNEPF, UWE; MARHAN, SVEN; RESCH, JULIA et al. (2022): Microplastics persist in an arable soil but do not affect soil microbial biomass, enzyme activities, and crop yield. In: J. Plant Nutr. Soil Sci., Artikel jpln.202200062. DOI: 10.1002/jpln.202200062.
  • SOLODOV, IGOR; BERNHARDT, YANNICK; LITTNER, LINUS; KREUTZBRUCK, MARC (2022): Ultrasonic Anisotropy in Composites: Effects and Applications. In: J. Compos. Sci. 6 (3), S. 93. DOI: 10.3390/jcs6030093
  • NÖLLER, M., HOLOCH, J., PAGEL, S., ROMBACH, J., LEGAT, J., BONTEN, C., BAUSE, K.: Lightweight Multi-Material-Design of a Liquid Cooled 18650 Cell Holder, KIT Scientific Work Papers, 2022, S. 1–1 8, DOI 10.5445/IR/1000144258
  • MOSTOVENKO, I., SCHAIBLE, T. und C. BONTEN: Entwicklung einer Methode zur Bestimmung der Dehnviskosität von gefüllten Polymeren, In: Technomer 2021 - 27. Fachtagung über Verarbeitung und Anwendung von Polymeren, 04.-05.11.2021 (online), Chemnitz, 2021, ISBN: 978-3-939382-15-7
  • MÜLLER, D., BONTEN, C., LINBRUNNER, C.: Die Durchsicht im Blick, In: Kunststoffe, 2021. 10/2021, S. 132-135
  • EHRLER, J.; SOLODOV, A.; KREUTZBRUCK, M: Materials strength and acoustic nonlinearity: case study of CFRP, Research in Nondestructive Evaluation, 2021, DOI: 10.1080/09349847.2021.2017531
  • EHRLER, J.; SOLODOV, A.; KREUTZBRUCK, M: Nonlinear acoustics for nondestructive evaluation of materials tensile strength, Proceedings of the  27th International Congress on Sound and Vibration, 2021, ISBN 978-83-7880-799-5

  • RESCH, J., DREIER, J., BONTEN, C. und M. KREUTZBRUCK: Miscibility and Phase Separation in PMMA/SAN Blends Investigated by Nanoscale AFM-IR. In: Polymers (2021) 13, 3809. https://doi.org/10.3390/polym13213809
  • KATTINGER, J.; EBINGER, T.; KURZ, R.; BONTEN C. Numerical simulation of the complex flow during material extrusion in fused filament fabrication. Additive Manufacturing, 2021, S. 102476.

  • KLIS, L. und C. BONTEN: Cleveres Rezept für die Mikrowelle. In: Kunststoffe 11/2021, S. 56–59
  • SOLODOV, I., BERNHARDT, Y., und M. KREUTZBRUCK: Resonant Airborne Acoustic Emission for Nondestructive Testing and Defect Imaging in Composites. In: Appl. Sci. 2021, 11(21), 10141. DOI: https://doi.org/10.3390/app112110141
  • BENZ, J. und C. BONTEN. Rigid Amorphous Fraction as an Indicator for Polymer-Polymer Interactions in Highly Filled Plastics. In: Polymers, 2021, 13(19), 3349. Doi:10.3390/polym13193349
  • YIGA, V. A., LUBWAMA, M., PAGEL, S., OLUPOT, P. W., BENZ, J., BONTEN, C.: Optimization of tensile strength of PLA/clay/rice husk composites using Box-Behnken design, Biomass Conversion and Biorefinery (2021), S. 1–27
  • DREIER, J., BRÜTTING, C., RUCKDÄSCHEL, H., ALTSTÄDT , V. und C. BONTEN: Investigation of the thermal and hydrolytic degradation of polylactide during autoclave foaming, Polymers 2021, 13, 2624 https://doi.org/10.3390/polym13162624
  • DREIER, J., BRÜTTING, C., ALTSTÄDT , V., RUCKDÄSCHEL, H. und C. BONTEN: Fossile Ressourcen einsparen – Partikelschäume aus PLA, Plastverarbeiter 6/2021, S.48-50

  • KLIEM, S., MAUCH, A., GEIGER, K. und C. Bonten: Rheological Characterization and Modeling of Thermally Unstable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), Polymers (2021) 13, 2294. https://doi.org/10.3390/polym13142294
  • PISZKO, M., T. SCHAIBLE, C. BONTEN und A.P. FRÖBA: Mutual and Thermal Diffusivities in Polystyrene Melts with Dissolved Nitrogen by Dynamic Light Scattering. In: Macromolecules, 2021. Doi:10.1021/acs.macromol.1c00819
  • KETTEMANN, J. und C. BONTEN: Experimentelle Untersuchungen auf einem axial teilbaren Einschneckenextruder mit genuteter Plastifizierzone, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 89–94, ISBN 978-3-9818681-2-8
  • KETTEMANN, J. und C. BONTEN: Simulation eines Planetwalzenextruders anhand einer Immersed Boundary Methode in OpenFOAM, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 283–288, ISBN 978-3-9818681-2-8
  • KETTEMANN, J., GATIN, I. und C. BONTEN: Verification and validation of a finite volume immersed boundary method for the simulation of static and moving geometries, Journal of Non-Newtonian Fluid Mechanics, 290 (2021), DOI: https://doi.org/10.1016/j.jnnfm.2021.104510

  • BRÜTTING, C., DREIER, J., BONTEN, C., ALTSTÄDT, V. und H. RUCKDÄSCHEL: Amorphous Polylactide Bead Foam–Effect of Talc and Chain Extension on Foaming Behavior and Compression Properties, Journal of Renewable Materials 2021, DOI: 10.32604/jrm.2021.016244
  • THIELEKE, P. und C. BONTEN: Enhanced Processing of Regrind as Recycling Material in Single-Screw Extruders. Polymers 2021, 13, 1540.
  • SCHAIBLE, T. und C. BONTEN: Recyclates on the Test Bench. Incoming Goods Inspection of Recyclates Ensures Reject Minimization. In: Kunststoffe international, 2021. 2021(04), S. 36–39.
  • ESSIG, W., Y. BERNHARDT, D. DOERING, I. SOLODOV, T. GAUTZSCH, M. GAAL, D. HUFSCHLLAEGER, R. SOMMERHUBER, M. BRAUNS, T. MARHENKE, J. HASENER, A. SZEWIECZECK und W. HILLGER: Air-coupled Ultrasound – Emerging NDT Method, In: ZfP-Zeitung Ausgabe 173, Februar 2021, Hrsgb.: Deutsche Gesellschaft für Zerstörungsfreie Prüfung, Österreichische Gesellschaft für Zerstörungsfreie Prüfung und Schweizerische Gesellschaft für Zerstörungsfreie Prüfung, Berlin, 2021, S. 32 – 43
  • CELIK, A., BONTEN, C., TOGNI, R., KLOSS, C. und C. GONIVA: A Novel Modeling Approach for Plastics Melting within a CFD-DEM Framework. Polymers 2021, 13, 227.

  • DREIER, J. und C. BONTEN: Charakterisierung von Schweißverbindungen aus amorphen Thermoplasten mittels Nano-IR-AFM, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 239-245, ISBN 978-3-9818681-2-8
  • DREIER, J., C. BRÜTTING, V. ALTSTÄDT und C. BONTEN: Modifizierung von amorphem Polylactid für das Partikelschäumen. 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 347-352, ISBN 978-3-9818681-2-8

  • DREIER, J., S. MURILLO CASTELLÓN und C. BONTEN: Modification of standard polyamides for blow molding. In: AIP Conference Proceedings 2289, 2020, 20018. DOI: 10.1063/5.0028380.

  • DREIER, J., C. BRÜTTING, V. ALTSTÄDT und C. BONTEN: Bio-Based Polymer Alternatives for Bead Foams . In: Kunststoffe International 3/2021, S. 46-49.
  • KLIS, L. und C. BONTEN: Modifizierung von Kunststoffen zur effizienten Erwärmung im Mikrowellenfeld (27. Stuttgarter Kunststoffkolloquium Stuttgart 01.–04. März 2021). 1. Aufl. Stuttgart. 2021. S. 139–1 46, ISBN 978-3-9818681-2-8
  • CELIK, A. und C. BONTEN: Simulation des Aufschmelzvorgangs von thermoplastischen Kunststoffen mittels CFD-DEM, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 289–295, ISBN 978-3-9818681-2-8
  • CELIK, A., RATKA, M. und C. BONTEN: Messapparatur zur Bestimmung der Aufschmelzrate von Kunststoffen, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 95–101, ISBN 978-3-9818681-2-8

  • MÜLLER, D., KNÖRLE, A. und C. BONTEN: Untersuchung eines Ansatzes zur Kennwertermittlung für die Thermoformsimulation, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 263–269, ISBN 978-3-9818681-2-8
  • BAUMGÄRTNER, F. und C. BONTEN: Untersuchung der prozessrelevanten Einflüsse auf das zeitabhängige pvT-Verhalten teilkristalliner Thermoplaste. In: 27. Stuttgarter Kunststoffkolloquium 01.-04. März, 1. Aufl., Stuttgart. 2021, S. 17–2 4.
  • BAUMGÄRTNER, F., M. WOLF und C. BONTEN: Modellierung des zeitabhängigen pvT-Verhaltens amorpher Thermoplaste auf Grundlage der viskoelastischen Theorie. In: 27. Stuttgarter Kunststoffkolloquium 01.-04. März, 1. Aufl., Stuttgart. 2021, S. 297–3 04.

  • KETTEMANN, J. und C. BONTEN: Untersuchung der Aufschmelzzone von Hochleistungsextrudern mit wendelgenuteter Plastifizierzone, Zeitschrift Kunststofftechnik 17 (2021), Nr. 1/2021
  • JOAS, S. und M. KREUTZBRUCK: Untersuchungen zur Ausbreitung von Wirbelströmen in kohlenstofffaserverstärkten Kunststoffen, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021. S. 227-234. ISBN 978-3-9818681-2-8
  • JOAS, S. und M. KREUTZBRUCK: Wirbelstromprüfung zur Qualitätssicherung kohlenstofffaserverstärkter Kunststoffe, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 221-226, ISBN 978-3-9818681-2-8

  • KORNELY, M. und M. KREUTZBRUCK: Ultraschallschweißen von kurzfaserverstärkten Kunststoffen-Eine Analyse, 27. Stuttgarter Kunststoffkolloquium, 1. Aufl. Stuttgart, 2021, S. 187–194, ISBN 978-3-9818681-2-8
  • SCHAIBLE, T. und C. BONTEN: Rezyklate auf dem Prüfstand. Analyse bei der Wareneingangskontrolle sorgt für Ausschussminimierung. In: Kunststoffe, 2021. 2021(03), S. 82–85.
  • EHRLER, J., CZICHOS, R., MIDDENDORF, P., KREUTZBRUCK, M.: Entwicklung eines Pre-Prozessors zur automatisierten numerischen Berechnung realistischer FKV-Mikrostrukturen, In: 27. Stuttgarter Kunststoff-Kolloquium, 1. Aufl. Stuttgart, 2021, S. 169–176, ISBN 978-3-9818681-2-8

  • MOSTOVENKO, I., T. SCHAIBLE und C. BONTEN: Untersuchung und Bestimmung der Dehnviskosität von gefüllten Polymeren. In: 27. Stuttgarter Kunststoff-Kolloquium, Stuttgart 2021, S. 81–88. ISBN 978-3-9818681-2-8.
  • SCHAIBLE, T., F. GRAUF und C. BONTEN: Inline-Viskositätsmessung von treibmittelbeladenen Kunststoffschmelzen. In: 27. Stuttgarter Kunststoff-Kolloquium, Stuttgart 2021, S. 57–63. ISBN 978-3-9818681-2-8.
  • SCHAIBLE, T., K. GEIGER und C. BONTEN: Visuelle Analyse des Expansionsverhaltens von treibmittelbeladenen Kunststoffschmelzen während der Unterwassergranulierung. In: 27. Stuttgarter Kunststoff-Kolloquium, Stuttgart 2021, S. 73–79. ISBN 978-3-9818681-2-8.
  • DREIER, J., C. BRÜTTING, V. ALTSTÄDT und C. BONTEN: Biobasierte Polymeralternativen für Partikelschäume. In: Kunststoffe 2/2021, S. 44-47

  • DREIER, J., S. MURILLO CASTELLÓN und C. BONTEN: Bio-foams made of modified polylactide. In: Bioplastics Magazine 1/2021 (16), S. 32-33

  • ESSLINGER, S., A. GREBHARDT, J. JAEGER, F. KERN, A. KILINGER, C. BONTEN und R. GADOW: Additive Manufacturing of β-Tricalcium Phosphate Components via Fused Deposition of Ceramics (FDC) [online]. Materials (Basel, Switzerland), 2020, 14(1). ISSN 1996-1944. Verfügbar unter: doi:10.3390/ma14010156

  • CELIK, A. und C. BONTEN: A novel method for efficient engineering design of sheet dies by means of fluid dynamics. In: AIP Conference Proceedings 2289, 020060, 2020; DOI https://doi.org/10.1063/5.0028750

  • JOAS, S. und M. KREUTZBRUCK: Schoko-Nikoläuse unter Beobachtung. In: Kunststoffe 12/2019, S. 44-47
  • BENZ, J. und C. BONTEN: Rigid amorphous fraction caused by particle-polymer-interaction in highly filled plastics. In: AIP Conference Proceedings, Hg. Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society. 18-22 November 2020. Pretoria, Südafrika, 2020. ISBN 978-0-7354-4019-7.

  • BAUMGÄRTNER, F. und C. BONTEN: Approach for the Description of PvT Behavior of Thermoplastics at High Cooling Rates. In: AIP Conference Proceedings 2289, 2020, 20010. Doi:10.1063/5.0029521
  • JOAS, S. und M. KREUTZBRUCK: Sensor data fusion of optically excited shearographic and thermographic data for optimized visualization of defects in plastic parts. AIP Conference Proceedings 2289, 020027 (2020), ISBN: 978-0-7354-4019-7

  • YIGA, A. V., M. LUBWAMA, S. PAGEL, J. BENZ, P. W. OLUPOT und C. BONTEN: Flame retardancy and thermal stability of agricultural residue fiber-reinforced polylactic acid: A Review. In: Polymer Composites, 2020. 40, S. 1­­­–30. Doi: 10.1002/pc.25835.

  • JOAS, S. und M. KREUTZBRUCK: Hochfrequenz-Wirbelstromprüfung an kohlenstofffaserverstärkten Kunststoffen – von der Theorie zur Anwendung. In: ZfP heute, 2020, S. 90-94.
  • KAST, O., SCHAIBLE, T. und C. BONTEN: Interdependence of Hygroscopic Polymer Characteristics and Drying Kinetics during Desiccant Drying and Microwave Supported Drying. In: International Polymer Processing, 2020. 4, S. 376-384.
  • P. THIELEKE: Increasing the Process Window of Single-screw Extruders Operated with Regrind. In: SPE Proceedings ANTEC 2020: The Virtual Edition, 2020
  • BERNHARDT, Y., D. SOLODOV, D. MÜLLER und M. KREUTZBRUCK: Listening for airborne sound of damage: a new mode of diagnostic imaging. In: frontiers in Built Environment, 2020 (6). DOI: 10.3389/fbuil.2020.00066
  • BERNHARDT, Y. und M. KREUZBRUCK: Groundbreaking Ultrasound Shear Waves. In: Kunststoffe International, 2020 (4)
  • BAUMGÄRTNER, F., BONTEN, C. et. al.: Resisting the Pressure. In: Kunststoffe international, 4(2020), S. 20- 23
  • BAUMGÄRTNER, F., BONTEN, C. et. al.: Dem Druck standhalten. In: Kunststoffe, 5(2020), S. 37- 40
  • DÖRR, D., STANDAU, T., MURILLO CASTELLÓN, S., BONTEN, C. and  V ALTSTÄDT: Rheology in the Presence of Carbon Dioxide (CO2) to Study the Melt Behavior of Chemically Modified Polylactide (PLA). In: Polymers 2020, 12(5), https://doi.org/10.3390/polym12051108   
  • BERNHARDT, Y. und M. KREUTZBRUCK: Integrated defect sensor for the inspection of fiber-reinforced plastics using air-coupled ultrasound, J. Sens. Sens. Syst., 9, 127–132, https://doi.org/10.5194/jsss-9-127-2020, 2020.
  • CELIK, A. und C. BONTEN: Breitschlitzdüsen schnell und effizient auslegen. In: Kunststoffe, Nr. 03/2020, S. 98-102
  • STANDAU, T., H. LONG, S. MURILLO CASTELLÓN, C. BRÜTTING, C. BONTEN und V. ALTSTÄDT: Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA). In: Materials, 2020, 13(6), 1371. Doi:10.3390/ma13061371
  • DÖRR, D., STANDAU, T., MURILLO CASTELLÓN, S., BONTEN, C. und V. ALTSTÄDT: Rheology in the Presence of Carbon Dioxide (CO2) to Study the Melt Behavior of Chemically Modified Polylactide (PLA). In: Polymers 2020, 12(5), https://doi.org/10.3390/polym12051108 
  • KETTEMANN, J., BONTEN, C.,  WOLFF R.,  RUDLOFF, J., LANG, M., HOCHREIN, T. und M. BASTIAN:  Understanding Kneading Holistically - Predict Co-Kneader Behavior Efficiently with Procedural Understanding, Kunststoffe International (2020), Nr. 6/2020, S. 40-44
  • KETTEMANN, J., BONTEN, C., WOLFF R., RUDLOFF, J., LANG, M., HOCHREIN, T. und M. BASTIAN, M: Kneten ganzheitlich verstehen - Mit verfahrenstechnischem Verständnis das Verhalten von Ko-Knetern effizient vorhersagen, Kunststoffe (2020), Nr. 8/2020, S. 42-46
  • KETTEMANN, J. und C. BONTEN: Simulation of a Saxton-Mixer in High-performance Extruders using the Immersed Boundary Method, ANTEC 2020: The Virtual Edition (2020)
  • BENZ, J., und C. BONTEN: Rigid amorphous fraction caused by particle-polymer-interaction in highly filled plastics. In: AIP Proceedings 2289, 2020, 20012. Doi: 10.1063/5.0028358
  • C. BONTEN: Mission of the century – Resource efficiency with plastics and plastics technology. In: AIP Proceedings 2289, 2020, 20001. Doi: 10.1063/5.2008435
  • DREIER, J., S. M. CASTELLON und C. BONTEN: Modification of standard polyamides for blow molding. In: AIP Proceedings 2289, 2020, 20018. Doi: 10.1063/5.0028380
  • DREIER, J., MURILLO CASTELLÓN, S., STANDAU, T., ALTSTÄDT, V. und C. BONTEN: Auf den Kompost, statt in den Müll. In: Kunststoffe 7/2020, S. 45-47
  • GEYER, A. und C. BONTEN: Smart machines: A new approach for optimizing the residual cooling time in injection molding. In: AIP Proceedings 2289, 2020, 20022. Doi: 10.1063/5.0028912
  • GREBHARDT, B., FORMISANO R. und C. BONTEN: Recyclates made of cast polyamide 6 and carboxilyc acid for blow molding. In: AIP Proceedings 2289, 2020, 20024. Doi: 10.1063/5.0028335
  • GREBHARDT, B., Formisano R. und C. Bonten: Recyclates made of cast polyamide 6 andcarboxilyc acid for blow molding. In: AIP Conference Proceedings, Hg. Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society: AIP Publishing, 2020, S. 20024. ISBN 978-0-7354-4019-7
  • MÜLLER, D. und C. BONTEN: Investigation on the processability of sheets for thermoforming. In: AIP Proceedings 2289, 2020, 20040. Doi: 10.1063/5.0028733
  • KAISER, J und C. BONTEN: Fracture mechanic examinations using the EWF-method in combination with digital image correlation. In: AIP Proceedings 2289, 2020, 20029. Doi: 10.1063/5.0028415
  • PAGEL, S., B. R. FORMISANO und C. BONTEN: Reactive extrusion of cast polyamide for thermoforming. In: AIP Proceedings 2289, 2020, 20003. Doi: 10.1063/5.0028388
  • M. CASTELLON, S., T. STANDAU, V. ALTSTÄDT und C. BONTEN: Modification of different polylactides by reactive extrusion to enhance their melt properties. In: AIP Proceedings 2289, 2020, 20015. Doi: 10.1063/5.0032123
  • KAISER, J. und C. BONTEN: Fracture mechanic examinations using the EWF-method in combination with digital image correlation. In: AIP Proceedings 2289, 2020, 20029. Doi: 10.1063/5.0028415
  • KATTINGER, J., J. KETTEMANN und C. BONTEN: Numerical 3D simulation of a co-kneader in OpenFOAM. In: AIP Proceedings 2289, 2020, 20031. Doi: 10.1063/5.0028367
  • KETTEMANN, J. und C. BONTEN: Application of the immersed boundary surface method in OpenFOAM. In: AIP Proceedings 2289, 2020, 20032. Doi: 10.1063/5.0028625
  • KLIEM, S., Y. TAHOUNI, T. CHENG, A. MENGES und C. BONTEN: Biobased smart materials for processing via fused layer modeling. In: AIP Proceedings 2289, 2020, 20034. Doi: 10.1063/5.0028730
  • KLIS, S., P. THIELEKE und C. BONTEN: Development of a novel extruder for the processing of a filament for robot-based 3D printing. In: AIP Proceedings 2289, 2020, 20037. Doi: 10.1063/5.0028452
  • MÜLLER, D. und C. BONTEN: Investigation on the processability of sheets for thermoforming. In: AIP Proceedings 2289, 2020, 20040. Doi: 10.1063/5.0028733
  • PAGEL, S., J. BENZ, G. MOURGAS, M. BUCHMEISER und C. BONTEN: Reactive compounding of intrinsically flame-resistant polyamides. In: AIP Proceedings 2289, 2020, 20043. Doi: 10.1063/5.0028391
  • REITINGER, P., F. WILLEMS und C. BONTEN: Calibration of models to predict the fiber microstructure of LFRT. In: AIP Proceedings 2289, 2020, 20047. Doi: 10.1063/5.0028757
  • SCHAIBLE, T., O. KAST und C. BONTEN: Investigation of temperature increase by microwave application in material drying. In: AIP Proceedings 2289, 2020, 20050. Doi: 10.1063/5.0028789
  • THIELEKE, P. und C. BONTEN: Influence of the fiber preheating in in-situ pultrusion of continuous fiber-reinforced thermoplastic profiles. In: AIP Proceedings 2289, 2020, 20054. Doi: 10.1063/5.0030419
  • WEINMANN, S. und C. BONTEN: Recycling of PA12 powder for selective laser sintering. In: AIP Proceedings 2289, 2020, 20056. Doi: 10.1063/5.0029945
  • WELLEKÖTTER, J. und C. BONTEN: Influence of the contacting on the resistance heating of carbon fiber reinforced thermoplastics. In: AIP Proceedings 2289, 2020, 20057. Doi: 10.1063/5.0029567
  • RESCH, J., M. KREUTZBRUCK und C. BONTEN: Modification of PHBV-blends with a biodegradable plasticizer. In: AIP Proceedings 2289, 2020, 20059. Doi: 10.1063/5.0028771
  • WILLEMS, F. und C. BONTEN: Prediction of the mechanical properties of long fiber reinforced thermoplastics. In: AIP Proceedings 2289, 2020, 20066.
  • WELLEKÖTTER, J. und C. BONTEN: Direct Joule Heating as a Means to Efficiently and Homogeneously Heat Thermoplastic Prepregs. In: Polymers, 2020, (2595). Doi:10.3390/polym12122959
  • WELLEKÖTTER, J., J. RESCH, S. BAZ, G.T. GRESSER und C. BONTEN: Insights into the Processing of Recycled Carbon Fibers via Injection Molding Compounding. In: Journal of Composites Science, 2020, 4(4), 161. Doi:10.3390/jcs4040161
  • WILLEMS, F.; REITINGER, P. und C. BONTEN: Calibration of Fiber Orientation Simulations for LFT—A New Approach. In: Journal of Composites Science 2020, 4(4), 163; DOI: https://doi.org/10.3390/jcs4040163
  • REITINGER, P., WILLEMS, F. und C. BONTEN: Calibration of Models to Predict the Fiber Microstructure of LFRT (PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society) : In: AIP Conference Proceedings 2289, 020047 (2020); DOI: https://doi.org/10.1063/5.0028757
  • KLIEM, S. und C. BONTEN: PHBV blown films, bioplastics Magazine (2020)6, S. 14–15
  • KLIEM, S., TAHOUNI, Y., CHENG, T., MENGES, A. und C. BONTEN: Biobased smart materials for processing via fused layer modeling. AIP Conference Proceedings 2289, 020034 (2020), https://doi.org/10.1063/5.0028730
  • KLIEM, S., KREUTZBRUCK, M. und C. BONTEN: Review on the Biological Degradation of Polymers in Various Environments, Materials (2020)13, https://doi.org/10.3390/ma13204586
  • KLIEM, S. und C. BONTEN: Bioabbaubar trotz Additiven, Kunststoffe (2020)9, S. 93–95
  • BERNHARDT, Y., RITTMANN, J., ESSIG, W. und M. KREUTZBRUCK: In-line quality assurance of metal-plastic-hybrid parts by air-coupled ultrasound. In: AIP Proceedings 2289, 2020, 20011. Doi: 10.1063/5.0028399
  • ESSIG, W. und M. KREUTZBRUCK: Investigation of the impregnation quality of thermoplastic tapes using air-coupled ultrasound. In:AIP Conference Proceedings, ed. Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society:AIP Publishing, 2020.
  • REICHLE, D., BERNHARDT, Y., THIELEKE, P. und M. KREUTZBRUCK: n-line flaw detection of pultruded profiles by air-coupled ultrasound. In: AIP Proceedings 2289, 2020, 20046. Doi: 10.1063/5.0028344
  • RESCH, J., M. KREUTZBRUCK und C. BONTEN: Modification of PHBV-blends with a biodegradable plasticizer. In: AIP Proceedings 2289, 2020, 20059. Doi: 10.1063/5.0028771
  • J. WELLEKÖTTER: Das Erwärmungsverhalten thermoplastischer Faserkunststoffverbunde durch Ausnutzung des Joule’s chen Effekts. Dissertation. Universität Stuttgart. Stuttgart, 2020.

  • J. WELLEKÖTTER: Das Erwärmungsverhalten thermoplastischer Faserkunststoffverbunde durch Ausnutzung des Joule’s chen Effekts. Dissertation. Universität Stuttgart. Stuttgart, 2020.

  • BERNHARDT, Y., LEHMANN, N., und M. KREUTZBRUCK: Automatische Winkelfindung für die Prüfung mit Luftultraschall und geführten Wellen. In: DGZFP Jahrestagung 2019, Friedrichshafen
  • BERNHARDT, Y., SOLODOV, I. und J. RITTMANN: Zerstörungsfreie Charakterisierung von Dichtungsringen in metallischen Filtergehäusen mittels umlaufender Ultraschallwellen. In: DGZFP Jahrestagung 2019, Friedrichshafen
  • BERNHARDT, Y., RITTMANN, J, ESSIG, W., und M. KREUTZBRUCK: In-Line Quality Assurance of Metal-Plastic-Hybrid Parts By Air-Coupled Ultrasound. In: PPS 2019, Pretoria, Südafrika

  • BERNHARDT, Y. und M. KREUTZBRUCK: Integraler Defekterkennungssensor für Faserkunststoffverbunde mit koppelmittelfreiem luftgekoppelten Ultraschall. In: 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019, Nürnberg

  • BERNHARDT Y., ESSIG, W. und M. KREUTZBRUCK: Richtungsweisende Scherwellen. In: Kunststoffe (2019), Nr. 2/2019
  • RAHAMMER, M. und M. KREUTZBRUCK: Fehlstellen zum Leuchten bringen – Impactschäden in CFK schnell und einfach finden. In: Kunststoffe (2019), Nr. 3/2019, S. 117-120
  • KAST, O., EPPLE, S. und C. BONTEN: Unbestechlich mischen – Die Mischgüte von Extrudaten mittels digitaler Bildauswertung bestimmen. In: Kunststoffe (2019), Nr. 4/2019, S. 60-63
  • THIELEKE, P. und C. BONTEN: Filamentextruder zum 3D-Drucken. In: Kunststoffe 06/2019, S. 64-67
  • JOAS, S.,  WILLEMS, F., KATTINGER, J. und M. KREUTZBRUCK: Wenn die Faser mit dem Plättchen: Orientierungsverhalten von Zusatzstoffmischungen simulieren. In: Kunststoffe 12/2019, S. 48-53
  • JOAS, S., WILLEMS, F., KATTINGER, J. und M. KREUTZBRUCK: When Fibers Mix with Platelets: Simulating the Orientation Behavior of Additive Mixtures. In: Kunststoffe international 12/2019, S. 31-35
  • SCHAIBLE, T., KAST, O. und C. BONTEN: Investigation of Temperature Increase by Microwave Application in Material Drying (PPS Europe Africa Conference 2019, Pretoria, 18.–21. November 2019). Pretoria, Südafrika, 2019
  • SCHAIBLE, T., SCHÖNLEIN, R. und C. BONTEN: Influence of Injection Molding Parameters on the Quality of Structured Surfaces (PPS Europe Africa Conference 2019, Pretoria, 18.–21. November 2019). Pretoria, Südafrika, 2019
  • PAGEL, S. und C. BONTEN: Ein molekulares Schwergewicht. In: Kunststoffe 07/2019, S. 78-81
  • MÜLLER, D., LANDSECKER, K. und C. BONTEN: Toward Thermoformed Metal-Plastic Hybrids. In: Kunststoffe international (2019), Nr. 08/2019, S. 47-50
  • MÜLLER, D., LANDSECKER, K. und C. BONTEN: Auf dem Weg zu thermogeformten Metall-Kunststoff-Hybriden. In: Kunststoffe (2019), Nr. 08/2019, S. 62-65
  • BENZ, J. und C. BONTEN: Influence of Polymer-Particle-Interaction on the Flow Behavior of Highly Filled Plastics. (rev.). In: S.-J. Liu, Hg. Proceedings of PPS-34. The 34th International Conference of the Polymer Processing Society : conference papers : 21-25 May 2018, Taipei, Taiwan, 2019. ISBN 0735417938.
  • HEYN, J. und C. BONTEN: Structure property relationships of PA6-EOR-blends. In: AIP Conference Proceedings 2055, 030002, 2019.
  • HEYN, J., S. KLIEM und C. BONTEN: Interaction between coolant, polyamide 6.6, glass fibers and additives. In: AIP Conference Proceedings 2055, 020006, 2019.
  • FORMISANO, B. und C. BONTEN: Recycling of cast polyamide 6 using a lubricant. In: AIP Conference Proceedings, 2019. 2055, 020001. DOI: 10.1063/1.5084802
  • FORMISANO, B. und C. BONTEN: Compounding anionic polymerized polyamide 6 using terephthalic acid. In: AIP Conference Proceedings, 2019. 2055, 020002. DOI: 10.1063/1.5084803
  • FORMISANO, B. und C. BONTEN: Blasformbares Rezyklat aus Gusspolyamid 6-Abfällen. In: Zeitschrift Kunststofftechnik, 2019. 15(1), S. 27–53. DOI: 10.3139/o999.02012019
  • GEYER, A. und C. BONTEN: Material characterization within the injection molding process. In: AIP Conference Proceedings, 2019. 2055(1), S. 120005. Doi:10.1063/1.5084895
  • GEYER, A. und C. BONTEN: Enhancing the weld line strength of injection molded components. In: AIP Conference Proceedings, 2019. 2055(1), S. 70023. Doi:10.1063/1.5084867
  • JOAS, S., ESSIG, W., FRÖHLICH, F. und M. KREUTZBRUCK: CFRP Pipe Inspection by Means of Air-Coupled Ultrasound. AIP Conference Proceedings 2055, 120003 (2019).
  • KAST, O. und C. BONTEN: Calculation of the Drying Process of Hygroscopic Polymer Pellets in Desiccant Dryers and With Additional Microwave Application. (rev.). In: S.-J. Liu, Hg. Proceedings of PPS-34. The 34th International Conference of the Polymer Processing Society : conference papers : 21-25 May 2018, Taipei, Taiwan, 2019. ISBN 0735417938.
  • KETTEMANN, J., AVILA-ALFARO, J.A. und C. BONTEN: Experimental investigation and improved modeling of the melting process in single-screw extruders with a grooved plasticizing barrel. In: AIP Conference Proceedings 2055, 030002, 2019
  • LANDSACKER, K. und C. BONTEN: Thermoforming simulation of heat conductive plastic materials using the K-BKZ model. (rev.) In: S.-J. Liu, Hg. Proceedings of PPS-34. The 34th International Conference of the Polymer Processing Society : conference papers : 21-25 May 2018, Taipei, Taiwan, 2019, 30049. ISBN 0735417938.
  • THIELEKE, P., T. RÄPPLE und C. BONTEN: Investigation of the melt quality of a double wave screw in a grooved plasticizing zone. In: AIP Conference Proceedings 2055, 070013, 2019.
  • THIELEKE, P. und C. BONTEN: Investigation of residence time distribution of different screw-barrel concepts via ultrasound in extrusion. In: AIP Conference Proceedings 2055, 070012, 2019.
  • YIGA, V. A.., S. PAGEL, M. LUBWAMA, S. EPPLE, P. W. OLUPOT und C. BONTEN: Development of fiber-reinforced polypropylene with NaOH pretreated rice and coffee husks as fillers: Mechanical and thermal properties. In: Journal of thermoplastic composite materials (2019), DOI: 10.1177/0892705718823255
  • BERNHARDT Y., J. RITTMANN, W. ESSIG und M. KREUTZBRUCK: Prüfung von dicken CFK Bauteilen mit der Total Focussing Methode. Leipzig, 2018.
  • ESSIG W., J. RITTMANN und M. KREUTZBRUCK: Entwicklung eines Vorlauftrichtes zur Fokussierung von Luftultraschallprüfköpfen. Leipzig, 2018.
  • HEYN, J.; J. KAISER und C. BONTEN: Bestimmung des gültigen Ligamentbereiches mittels digitaler 3D-Bildkorrelation. In: Materials Testing, Jg. 60, Ausgabe 9 (2018), S. 869–876.
  • HEYN, J. und C. BONTEN: Alternatives Verfahren zur Bestimmung des Spröd-duktil-Übergangs bei geringen Prüfgeschwindigkeiten . In: Zeitschrift Kunststofftechnik, Ausgabe 3 (2018), S. 174–191.
  • HEYN, J., J. KAISER und C. BONTEN: Verstehen, was den Werkstoff bewegtDigitale 3D-Bildkorrelation als Werkzeug für Prozessanalyse und Werkstoffentwicklung. In: Kunststoffe (2018), Nr. 4/2018, S. 74–78.
  • JOAS, S., RITTMANN, J., VU, H. und M. KREUTZBRUCK: Untersuchung des Einflusses von Artefakten auf das Prüfergebnis des robotergestützten Wirbelstromverfahrens an CFK-Bauteilen. (DGZfP-Jahrestagung 07.-09. Mai 2018). Leipzig, 2018.
  • KETTEMANN, J., AVILA-ALFARO, J.A. und C. BONTEN: Licht ins Dunkel bringen – Aufschmelzleistung in genuteten Plastifizierzylinder vorhersagen. In: Kunststoffe (2018), Nr. 1/2018, S. 55-59
  • MURILLO CASTELLON, S., Bölz, U. und C. BONTEN: Wie der Beutel in die Flasche kommt - Modifikation herkömmlicher Polyamide zum Blasformen. In: Kunststoffe, 3(2018), 104- 108
  • BENZ, J. und C. BONTEN: Temperature induced ageing of PA12 powder during selective laser sintering process. In: Udo Wagenknecht, Petra Pötschke und Sven Wiessner and Michael Gehde, Hg. PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 – POLYMER PROCESSING SOCIETY PPS. 27–29 June 2017. Dresden, Germany, 2017, 140001. ISBN 978-0-7354-1783-0.
  • BENZ, J. und C. BONTEN: Reactive extrusion of PA6 – different ways to increase the viscosity. rev.). In: Udo Wagenknecht, Petra Pötschke und Sven Wiessner and Michael Gehde, Hg. PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 – POLYMER PROCESSING SOCIETY PPS. 27–29 June 2017. Dresden, Germany, 2017, 20004. ISBN 978-0-7354-1783-0.
  • GÖTTERMANN, S., STANDAU, T., ALTSTÄDT, V. und C. BONTEN: Modification, Preparation and Characterization of Polylactide Foams (SPE Fomas 2017 - 15th International Conference on Advances in Foam Materials & Technology, Bayreuth, 11.-12. Oktober 2017). Bayreuth, 2017
  • GÖTTERMANN, S., STANDAU, T., WEINMANN, S., ALTSTÄDT, V. und C. BONTEN: Effect of chemical modification on the thermal and rheological properties of polylactide. In: Polymer Engineering and Science, Volume 57, Issue 11, 1242-1251 (2017)
  • LANDSECKER, K. und C. BONTEN: Abwärmefunktion inklusive. In: Kunststoffe (2017), Nr. 09/2017, S. 138–141
  • LANDSECKER, K., KROH, M. und C. BONTEN: Vorteile beim Hybridthermoformen nutzen. In: Plastverarbeiter (2017), Nr. 08/2017, S. 18–2 1
  • GÖTTERMANN, S., STANDAU, T., ALTSTÄDT, V. und C. BONTEN: Modified Polylactide with improved properties for extrusion foaming (PPS Europe Africa Conference 2017, Dresden, 26.–29. Juni 2017). Dresden, 2017
  • LANDSECKER, K. und C. BONTEN: Investigation on the Thermoformability of Heat Conductive Plastics (PPS Europe Africa Conference 2017, Dresden, 26.–29. Juni 2017). Dresden, 2017
  • GEYER, A. und C. BONTEN: Die kritische Dehnung nutzen. In: Kunststoffe (2017), Nr. 10/2017, S. 143–147
  • ERB, T., CELIK, O. und C. BONTEN: Mischgüte in Einschneckenextrudern vorhersagen, Kunststoffe (2017), Nr. 10/2017, S. 175–1 77
  • KOSLOWSKI, T., GEYER, A. und C. BONTEN: Werkstoffcharakterisierung im Werkzeug. In: Kunststoffe (2017), Nr. 9/2017, S. 108–1 12
  • HEYN, J. und C. BONTEN: Structure Property Relationships of PA6-EOR-Blends (PPS Europe Africa Conference 2017, Dresden, 26.–29. Juni 2017). Dresden, 2017
  • HEYN, J., Kliem, S. und C. BONTEN: Interaction between Coolant, Polyamide 6.6, Glass Fibers and Additives (PPS Europe Africa Conference 2017, Dresden, 26.–29. Juni 2017). Dresden, 2017
  • GEIGER, K., MARTIN, G. A., SOBOTTA, A. und C. BONTEN: Numerische Simulation von Strömungsvorgängen in Extrusionswerkzeugen für teilvernetzte oder hochgefüllte Kunststoffschmelzen. In: Zeitschrift Kunststofftechnik, Ausgabe 13 (2017), S. 145-174
  • BONTEN, C., KETTEMANN, J. und J.A. AVILA-ALFARO: Analytische Berechnung der Aufschmelzleistung in Hochleistungsextrudern (VDI-Jahrestagung Extrusionstechnik 2017, Köln, 21.-22. Juni 2017). Köln, 2017
  • GÖTTERMANN, S., STANDAU, T., ALTSTÄDT, V. und C. BONTEN: Modified Polylactide with improved thermal and rheological properties for foaming (SPE ANTEC Conference 2017, Anaheim, 08.-10. Mai 2017). Anaheim, 2017
  • GOEBEL, L. und C. BONTEN: Cellulose mittels ionischer Flüssigkeit zum Thermoplasten modifizieren (25. Stuttgarter Kunststoffkolloquium Stuttgart 22.–23. März 2017). 1. Aufl. Stuttgart. 2017. ISBN 978-3-9818681-0-4.
  • GOEBEL, L. und C. BONTEN: Herstellung eines Blockcopolymers zur Schlagzähmodifizierung von Polyhydroxybutyrat (PHB) (25. Stuttgarter Kunststoffkolloquium Stuttgart 22.–23. März 2017). 1. Aufl. Stuttgart. 2017. ISBN 978-3-9818681-0-4.
  • KOSLOWSKI, T. und C. BONTEN: Shrinkage, Warpage and Residual Stresses of Injection Molded Parts. In: SPE Proceedings ANTEC 2017. 2017
  • KOSLOWSKI, T. und C. BONTEN: Abkühlverhalten von spritzgegossenen Kunststoffbauteilen unter realen Bedingungen. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. ISBN 978-3-9818681-0-4
  • KOSLOWSKI, T. und C. BONTEN: Schwindung, Verzug und Eigenspannungen spritzgegossener Formteile. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. ISBN 978-3-9818681-0-4
  • KOSLOWSKI, T. und C. BONTEN: Verbesserung der Wärmeleitfähigkeit von spritzgegossenen Bauteilen. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017.ISBN 978-3-9818681-0-4
  • RAHAMMER, M. und M. KREUTZBRUCK: Local Defect Resonance Excitation Thermography for Damage Detection in Plastic Composites (PPS Europe Africa Conference 2017, Dresden, 26.–29. Juni 2017). Dresden, 2017
  • WELLEKÖTTER, J., S. BAZ, J. SCHWINGEL, G.T. GRESSER, P. MIDDENHOFund C. BONTEN: Recycling of composites – A new approach minimizes downgrading. In: Proceedings of the Polymer Processing Society 31st Annual Meeting, 2017, 60009. Doi:10.1063/1.5084841
  • WELLEKÖTTER, J., S. BAZ, J. SCHWINGEL, C. BONTEN, G.T. GRESSER und P. MIDDENDORF: Ressourceneffizienter Leichtbau durch neues Recyclingkonzept. In: 25. Stuttgarter Kunststoffkolloquium, 2017.
  • WELLEKÖTTER, J., L. MARX, J. WÄLDER, O. KAST, M. LIEWALD und C. BONTEN: Kunststoff-Metall-Fließpressen - Ein neues Verfahren zur Herstellung von Kunststoff-Metall-Hybriden. In: 25. Stuttgarter Kunststoffkolloquium, 2017.
  • KETTEMANN, J., AVILA-ALFARO, J.A., und C. BONTEN: Modellierung und Simulation des Aufschmelzvorgangs in Einschneckenextrudern mit genutetem Plastifizierzylinder. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 27–34. ISBN 978-3-9818681-0-4
  • KETTEMANN, J., AVILA-ALFARO, J.A. und C. BONTEN: Experimentelle Untersuchungen des Aufschmelzvorgangs in Einschneckenextrudern mit genutetem Plastifizierzylinder. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 35–42. ISBN 978-3-9818681-0-4
  • BENZ, J. und C. BONTEN: Reaktive Extrusion von PA6 – Möglichkeiten zur Erhöhung der Viskosität. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 345–350. ISBN 978-3-9818681-0-4
  • BENZ, J. und C. BONTEN: Temperaturbedingte Alterung von PA12 Pulver im Selektiven Lasersinterprozess. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 357–3 62. ISBN 978-3-9818681-0-4
  • WILLEMS, F., BENZ, J. und C. BONTEN: Schallemission zur Ermittlung der kritischen Dehnung von faserverstärkten Kunststoffen. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S.279–286. ISBN 978-3-9818681-0-4
  • CELIK, O. und C. BONTEN: Neuartiger Versuchsaufbau zur Untersuchung von Blends in Einschneckenextrudern. In: 25. Stuttgarter Kunststoff-Kolloquium 22.‑23.03.2017. Stuttgart, 2017
  • CELIK, O. und C. BONTEN: Werkzeuge für Einschneckenextruder noch effizienter auslegen. In: 25. Stuttgarter Kunststoff-Kolloquium 22.‑23.03.2017. Stuttgart, 2017
  • FORMISANO, B. und C. BONTEN: Modifizierte Zeolith-Wabenkörper für die Wärmespeicherung. In: Stuttgarter Kunststoffkolloquium 22.–23. März 2017. Stuttgart, 2017
  • FORMISANO, B. und C. BONTEN: Die werkstoffliche Wiederverwertung von Gusspolyamid 6. In: Stuttgarter Kunststoffkolloquium 22.–23. März 2017. Stuttgart, 2017
  • GEYER, A. und C. BONTEN: Werkstoffcharakterisierung im Spritzgießprozess. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22.–23. März 2017). 1. Aufl. Stuttgart. 2017. S. 69–76. ISBN 978-3-9818681-0-4.
  • GEYER, A. und C. BONTEN: Verbesserung der Bindenahtfestigkeit spritzgegossener Bauteile durch eine neuartige Werkzeugtechnik. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22.–23. März 2017). 1. Aufl. Stuttgart. 2017. S. 85–92. ISBN 978-3-9818681-0-4.
  • HEYN, J. und C. BONTEN: Struktur-Eigenschaftsbeziehungen von PA6/EOR-Blends. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 301–308. ISBN 978-3-9818681-0-4.
  • HEYN, J. und C. BONTEN: Äußere Einflüsse auf die bruchmechanischen Eigenschaften von PA6/EOR-Blends. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 309–3 16. ISBN 978-3-9818681-0-4.
  • HEYN, J. und C. BONTEN: Wechselwirkung zwischen Kühlmittel, Polyamid 6.6,Glasfasern und Additiven. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22. –23. März 2017). 1. Aufl. Stuttgart. 2017. S. 351–3 56. ISBN 978-3-9818681-0-4.
  • KOSLOWSKI, T. und C. BONTEN: Wärme aus dem Bauteil gezielt in Dickenrichtung abführen, In Kunststoffe (2017), Nr. 2/2017, S. 37–40
  • GÖTTERMANN, S. und C. BONTEN: Kunststoffe in der Umwelt - Erfassen, Bewerten, Vermeiden. In: 25. Stuttgarter Kunststoffkolloquium, 2017.
  • GÖTTERMANN, S., STANDAU, T., ALTSTÄDT, V. und C. BONTEN: Modifiziertes Polylactid für das Schäumen. In: 25. Stuttgarter Kunststoffkolloquium, 2017.
  • JOAS, S. und M. KREUTZBRUCK: Automatisierte Hochfrequenz-Wirbelstromprüfung zur Defekterkennung in kohlenstofffaserverstärkten Kunststoffen. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22.–23. März 2017). 1. Aufl. Stuttgart. 2017. S. 251–257. ISBN 978-3-9818681-0-4
  • JOAS, S., ESSIG, W., FRÖHLICH, F. und M. KREUTZBRUCK: Entwicklung eines Messverfahrens zur CFK-Rohrprüfung mittels luftgekoppelten Ultraschalls. (25. Stuttgarter Kunststoffkolloquium Stuttgart 22.–23. März 2017). 1. Aufl. Stuttgart. 2017. S. 227–233. ISBN 978-3-9818681-0-4

 

  • HEYN, J. und C. BONTEN: Media influence on the fracture mechanical behavior of polyamide. In: AIP Conference Proceedings 1779, 070004, 2016
  • BENZ, J., WILLEMS, F. und C. BONTEN: The Sound of Materials. In: Kunststoffe international 11/2016, S. 46 – 49
  • BONTEN, C. und T. KOSLOWSKI: Compounds mit wärmeleitfähigen, anisotropen Füllstoffen – Herausforderungen bei der Verarbeitung (VDI-Fachkonferenz Kunststoffe in Mechatronik & Polytronik, Düsseldorf, 06-07.12.2016).Düsseldorf, 2016
  • BONTEN, C. und T. KOSLOWSKI,: Verarbeitung von Thermoplasten mit Langfasern und Endlosfasern, (VDI-Jahrestagung Spritzgießen 2016, Baden-Baden, 17.-18.02.2016). Baden-Baden, 2016
  • GOEBEL, L. und C. BONTEN: Crystallization Behavior of Polyhydroxybutyrate (PHB)”. In: AIP Conference Proceedings 1779, 030004 (2016)
  • GOEBEL, L. und C. Bonten: Reaktivextrusion von Biokunststoffen (42. Deutsche Compoundiertagung 2016, Nürnberg, 6. -7. Dezember 2016). Nürnberg, 2016
  • WÄLDER, J., WELLEKÖTTER, J., FELDE, A., LIEWALD, M. und C. BONTEN: Numerical Investigations For Simultaneously Processing Metal And Plastic Using Impact Extrusion. In: MATEC Web of Conferences 80, 2016
  • BENZ, J., WILLEMS, F. und C. BONTEN: Die Ohren gespitzt. In: Kunststoffe 11/2016, S. 84 – 87
  • HEYN, J. und C. BONTEN: Der ist doch (nicht) ganz dicht. In: Kunststoffe (2016), Nr. 11/2016, S. 92–95
  • HEYN, J. und C. BONTEN: Keeps Its Cool. In: Kunststoffe International (2016), Nr. 11/2016, S. 54–57
  • WILLEMS, F., BENZ, J. und C. BONTEN:   Detecting the Critical Strain of Fiber Reinforced Plastics by Means of Acoustic Emission Analysis (32nd European Conference on Acoustic Emission Testing 2016, 07.–09. September 2016). Praque, 2016
  • STANDAU, T., GÖTTERMANN, S., WEINMANN, S., BONTEN, C. und V. ALTSTÄDT: Autoclave Foaming of Chemically Modified Polylactide (PLA), In: Journal of Cellular Plastics, Special Issue, 0(0), 1-9,  doi: 10.1177/0021955X16670588, 2016
  • GEIGER, K. und G.A. MARTIN: Berechnungsgrundlagen für die Strömung in keilförmigen Scherspalten und Fließeigenschaften von gefüllten Polymerschmelzen.  In: Der gleichläufige Doppelschneckenextruder - Grundlage, Technologie, Anwendungen, Carl Hanser Verlag München, 2016
  • J. BENZ: Versatility Wanted. In: Kunststoffe international 9/2016
  • J. BENZ: Vielseitigkeit ist gefragt. In: Kunststoffe 9/2016
  • FORMISANO, B. und C. BONTEN: Extruded Zeolitic Honeycombs for Sorptive Heat Storage. In: AIP Conference Proceedings, 2016. 1779, 030003; DOI: 10.1063/1.4965473
  • KAST, O.; BONTEN, C.: Influence of a grooved melting zone on high-speed single screw extrusion. In: AIP Conference Proceedings 1779, 030004 (2016)
  • ERB, T., CELIK, O. und C. BONTEN: Three-dimensional characterization of dispersive mixing in single screw extruders, AIP Conference Proceedings 1779, 050001 (2016); doi: 10.1063/1.4965506
  • GAAL, M., BOVTUN, V., STARK, W., ERHARD, A., YAKYMENKO, Y. M. KREUTZBRUCK: Viscoelastic properties of cellular polypropylene ferroelectrets, In: J. Appl. Phys., 119, 12, 125101 (2016)
  • RAHAMMER, M., SOLODOV, I., BISLE, W., SCHERLING, D. und M. KREUTZBRUCK: Thermosonic Testing with Phase Matched Guided Wave Excitation, In: J Nondestruct Eval (2016) 35: 47
  • SOLODOV, I., RAHAMMER, M., GULNIZKIJ, N. und M. KREUTZBRUCK: Noncontact Sonic NDE and Defect Imaging Via Local Defect Resonance, In: J Nondestruct Eval (2016) 35: 48.
  • THIEL E., KREUTZBRUCK, M. und M. ZIEGLER: Laser-projected photothermal thermography using thermal wave field interference for subsurface defect characterization, In: Appl. Phys. Lett. 109, 123504 (2016)
  • GOEBEL, L. und C. BONTEN: Crystallization Behavior of Polyhydroxybutyrate (PHB). In: SPE Proceedings ANTEC 2016. 2016
  • WILLEMS, F. und C. BONTEN: Einfluss der Modellparameter zur Vorhersage der Faserorientierung und Faserlänge (Moldex3D Anwendertreffen 2016, 12. – 13. April 2016). Münster, 2016
  • WELLEKÖTTER, J., WÄLDER, J., KAST, O., FELDE, A., BONTEN, C. und M. LIEWALD: Kunststoff und Metall auf Anhieb verbinden - Optimale Plastifizierung und Haftung beim Kunststoff-Metall-Fließpressen. In: Kunststoffe 6 (2016), S. 33-36
  • GÖTTERMANN, S., BONTEN, C. und F. BRÜMMER: Kunststoffe in aquatischen Lebensräumen. Poster, Runder Tisch Meeresmüll, 18. März 2016, Berlin
  • GÖTTERMANN, S., BÖHME, L., BRÜMMER, F., BONTEN, C. und M. KRANERT: Kunststoffe in Komposten und Gärprodukten aus Bioabfällen. Poster, Runder Tisch Meeresmüll, 18. März 2016, Berlin
  • GÖTTERMANN, S., ECKERT, K., BONTEN, C. und F. BRÜMMER: Analytical Studies on the Formation of Biofilms on Plastic Surfaces in Freshwater. Poster, European conference on Plastics in Freshwater Environments, 21. – 22. Juni 2016, Berlin
  • FORMISANO, B. und C. BONTEN: Recycling von Gusspolyamid-Abfällen. In: Zeitschrift Kunststofftechnik Bd. 12 (2016), Nr. 4, S. 259–293
  • ADEBAHR, W. und M. KREUTZBRUCK: Non-destructive Testing of 3D-Hybrid Components using Air-coupled Ultrasound. In: 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation Conference. Atlanta, 2016
  • KAST, O. und C. BONTEN: Hochleistungs-Einschneckenextruder mit wendelgenuteter Plastifizierzone (VDI-Jahrestagung Extrusionstechnik 2016, Köln, 21.–22. Juni 2016). Köln, 2016
  • ADEBAHR, W., FEY, P. und M. KREUTZBRUCK: Non-contact Inline Monitoring of Thermoplastic CFRP Tape Quality Using Air-coupled Ultrasound. In: 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation Conference. Atlanta, 2016
  • NEUBIG, B. und C. BONTEN: Determination of Temperature Profiles Across the Sheet Thickness During the Heating Phase of Thermoforming Processes (10th ETC Conference, Sitges, Spain 10. - 11. March 2016). Sitges, Spain, 2016
  • ADEBAHR, W., SACHSE, R., MIDDENDORF, P. und M. KREUTZBRUCK: Crack Growth Monitoring at CFRP Adhesive Bondings. In: 19 th World Conference on Non-Destructive Testing. München, 2016
  • ADEBAHR, W., BERNHARDT, Y. und M. KREUTZBRUCK: 3D-robotized Air-coupled Ultrasound Measurements of Large Components. In: 19 th World Conference on Non-Destructive Testing. München, 2016
  • FEY, P., MEILER, S. A. unf M. KREUTZBRUCK: Non-Contact Inline Monitoring of Thermoplastic CFRP Tape Quality Using Air-Coupled Ultrasound. In: 19 th World Conference on Non-Destructive Testing. München, 2016
  • FEY, P. und M. KREUTZBRUCK: Monitoring Fatigue Damage in CFRP Using Ultrasonic Birefringence. In: 19 th World Conference on Non-Destructive Testing. München, 2016
  • MEILER, S. FEY, P., ADEBAHR, W., KREUTZBRUCK, M., DRASKOVIC, M. und P. MIDDENDORF: Non-destructive Testing of CFR-Tapes with Thermoplastic Matrix using Air-coupled Ultrasound. In: SPE ANTEC TM Indianapolis 2016. Indianapolis, 2016
  • FEY, P., GEYER, A. und M. KREUTZBRUCK: Weld Line Characterisation Using Various Contact and Non-Contact Ultrasound Techniques. In: 19 th World Conference on Non-Destructive Testing. München, 2016
  • ADEBAHR, W., I. SOLODOV, M. RAHAMMER, N. GULNIZKIJ und M. KREUTZBRUCK: Local defect resonance for sensitive non-destructive testing. In: AIP Conference Proceedings, 2016, 1706, S. 50005. Doi:10.1063/1.4940504
  • MYRACH, P., C. MAIERHOFER, M. RAHAMMER und M. KREUTZBRUCK: Parameters in lock-in thermography of CFRP laminates. In: Materials Testing, 2016, 58(1), S. 31-35. Doi:10.3139/120.110814
  • RAHAMMER, M., W. ADEBAHR, R. SACHSE, S. GRÖNINGER und M. KREUTZBRUCK: Crack growth monitoring at CFRP bond lines. In: AIP Conference Proceedings, 2016, 1706, S. 120018. Doi:10.1063/1.4940603
  • RAHAMMER, M., SOLODOV, I., BISLEW, SCHERLING, D. und M. KREUTZBRUCK: Phased matched guided wave excitation for ultrasonic thermography. In: 13th Quantitative Infrared Thermography Conference. Munich, 2016.
  • RAHAMMER, M., I. SOLODOV, W. BISLE, D. SCHERLING and M. KREUTZBRUCK: Thermosonic Testing with Phased Matched Guided Wave Excitation. In: Proceedings of the 19th World Conference on Non-Destructive Testing. Munich, 2016.
  • RAHAMMER, M., I. SOLODOV, N. GULNIZKIJ und M. KREUTZBRUCK: Local Defect Resonance for efficient defect detection in composites. In: ECCM17 - 17th European Conference on Composite Matierals. Munich, 2016.
  • RAHAMMER, M., D. VETTER und M. KREUTZBRUCK: Optical excitation thermography with VCSEL-array source. In: 13th Quantitative Infrared Thermography Conference. Munich, 2016.
  • FORMISANO, B., SCHAPITZ, T., KERSKES, H. und C. BONTEN: Extrudierte zeolithische Wabenkörper für den Einsatz in der Wärmespeicherung. In: Keramische Zeitschrift 68 (2016), Nr. 3, S. 167–171
  • SKRABALA, O. und C. BONTEN: The Potential of Expanding Elongation Flows to Increase the Through-Plane Thermal Conductivity. In: SPE Proceedings ANTEC 2016. 2016.
  • LANDSECKER, K. und C. BONTEN: Effizienzsteigerung durch Inline-Wanddickenmessung beim Thermoformen. In: Kunststoffe (2016), Nr. 04, S. 86 - 88
  • SKRABALA, O. und C. BONTEN: Verarbeitungsinduzierte Eigenschaftsbeeinflussung bei wärmeleitfähigen Kunststoffen (Fachtagung Polyamide 19.-20. April 2016). Würzburg, 2016
  • SKRABALA, O. und C. BONTEN: Orientierungsverhalten plättchenförmiger Zusatzstoffe. In: Zeitschrift Kunststofftechnik Bd. 12 (2016), Nr. 03, S. 157-18
  • GÖTTERMANN, S., WEINMANN, S., BONTEN, C., STANDAU, T. und V. ALTSTÄDT: Airy Standard Material Kunststoffe International 01-02 (2016), S. 70-73
  • LANDSECKER, K. und C. BONTEN:  Increase in Efficiency by Inline-sheet Thickness Measurement (10th European Thermoforming Conference 2016, Sitges (Barcelona), Spain, 10. - 11. März 2016). Sitges, 2016
  • LANDSECKER, K. und C. BONTEN: Effizienzsteigerung durch Inline-Wanddickenmessung beim Thermoformen. In: Kunststoffe (2016), Nr. 04, S. 86 - 88
  • GÖTTERMANN, S., WEINMANN, S., BONTEN, C., STANDAU, T. und V. ALTSTÄDT: Luftiges Standardmaterial, Kunststoffe 1 (2016), S.68 – 71
  • AVILA-ALFARO, J. A. und C. BONTEN: Melting Rate of a Single Screw Extruder with a Grooved Melting Zone. PPS Europe/Africa Regional Conference 2015, Graz, Austria, 2015
  • SKRABALA, O., GOEBEL, L. und C. BONTEN: Electronic Components from the 3-D Printer. In: Kunststoffe International (2016), Nr. 1-2/2016, S. 15–17
  • SKRABALA, O., GOEBEL, L. und C. BONTEN: Elektronik aus dem 3D-Drucker. In: Kunststoffe (2016), Nr. 1/2016, S. 27–29
  • GÖTTERMANN, S., WEINMANN, S., BONTEN, C., STANDAU, T. und V. ALTSTÄDT: Luftiges Standardmaterial, Kunststoffe 1 (2016), S.68 – 71
  • BENZ, J. und C. BONTEN: Ein Polyamid nach Maß. In: Kunststoffe 5/2015, S. 94 – 96
  • DASCHEWSKI, M., KREUTZBRUCK, M. und J. PRAGER: Resonance-free measuring and excitation of ultrasound, In: tm-Technisches Messen (2015) V82 : 3 pp. 156-166
  • SKRABALA, O. und C. BONTEN: Der Prozess bestimmt die Eigenschaften. In: chemie&more (2015), Nr. 4.15, S. 16 – 19
  • GÖTTERMANN, S., WEINMANN, S., BONTEN, C., STANDAU, T. und V. ALTSTÄDT: Foams made from modified standard PLA, In: bioplastics MAGAZINE [04/15] Vol. 10, S. 38 - 40 
  • KAST, O., GEIGER, K., GRÜNSCHLOSS, E. und C. BONTEN: Analysis of Pellet Shaping Kinetics at the Die Opening in Underwater Pelletizing Processes. In: Polymer Engineering and Science 55 (2015) Nr. 5, S. 1170 – 1176
  • WILLEMS, F. und C. BONTEN:   Vorhersage der Faserlängenverkürzung bei der Verarbeitung von faserverstärkten Kunststoffbauteilen (International Moldex3D – Usermeeting, 9. – 10. Juni 2015). Karlsruhe, 2015
  • SKRABALA, O. und C. BONTEN: Die Richtung muss stimmen: Füllstofforientierung beeinflusst Wärmeleitfähigkeit von Kunststoffbauteilen. In: Kunststoffe (2015), Nr. 6/2015, S. 84 – 87
  • AVILA-ALFARO, J. A., GRÜNSCHLOß, E, EPPLE, S. und C. BONTEN: Analysis of a Single Screw Extruder with a Grooved Plasticating Barrel–Part I: The Melting Model. International Polymer Processing 30, S. 284 - 296 (2015).
  • KAST, O. und C. BONTEN: Untersuchung eines schnelllaufenden Einschneckenextruders mit wendelgenuteter Plastifizierzone. In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2015), Nr. 3, S. 180 – 203
  • MUSIALEK, M., NEUBIG, B. und C. BONTEN: Modifikationen zum Dahinschmelzen. In: Kunststoffe 4/2015, S. 97 - 99 PDF
  • FEY, P. und M. KREUTZBRUCK: Charakterisierung von Faserkunststoffverbunden mittels der Doppelbrechung und geführten Wellen. In: Seminar des Fachausschusses Ultraschallprüfung - Ultraschallprüfung von komplexen Werkstoffen, Bauteilen und Verbindungen, 3. – 4. November 2015, Saarbrücken
  • ADEBAHR, W. und M. KREUTZBRUCK: Luftultraschallprüfung mit einseitigem Zugang für FKV-Bauteile mit hohem Komplexitätsgrad. In: Seminar des Fachausschusses Ultraschallprüfung - Ultraschallprüfung von komplexen Werkstoffen, Bauteilen und Verbindungen, 3. – 4. November 2015, Saarbrücken
  • FEY, P. und M. KREUTZBRUCK: Quantification of Fatigue State in CFRP Using Ultrasonic Birefringence. In: 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation Conference. Minneapolis, 2015
  • KAST, O. und C. BONTEN: Influence of a Grooved Melting Zone on High-speed Single Screw Extrusion (PPS Europe/Africa Regional Conference 2015, Graz, Austria, 21. - 25. September 2015). Graz, 2015
  • ADEBAHR, W., M. RAHAMMER, R. SACHSE, S. GRÖNINGER, M. KÄß, M. KREUTZBRUCK and G. BUSSE: Überwachung des Risswachstums in CFK-Klebeverbindungen. In: 24. Stuttgarter Kunststoff-Kolloquium. Stuttgart, 2015.
  • BENZ, J. und C. BONTEN: A Polyamide Made to Measure. In: Kunststoffe international 5/2015
  • RAHAMMER, M. und M. KREUTZBRUCK: Local Defect Resonance for Structural Health Monitoring. Helsinki, July 1st 2015. 68th IIW Annual Assembly and International Conference.
  • RAHAMMER, M., P. MYRACH, C. MAIERHOFER, G. BUSSE and M. KREUTZBRUCK: Auflösungsgrenzen der Lockin-Thermografie zur Prüfung von Faserkunststoffverbunden. In: 24. Stuttgarter Kunststoff-Kolloquium. Stuttgart, 2015.
  • RAHAMMER, M., I. SOLODOV, D. DERUSOVA and M. KREUTZBRUCK: Thermische Chladni Klangfiguren in der zerstörungsfreien Prüfung. In: Thermographie-Kolloquium 2015. Stuttgart, 2015.
  • RAHAMMER, M., I. SOLODOV and M. KREUTZBRUCK: Energieeffiziente Ultraschallanregung für die Thermografie. In: Tagungsband der DACH-Jahrestagung. Salzburg, 2015.
  • SOLODOV, I., D. DERUSOVA and M. RAHAMMER: Thermosonic Chladni figures for defect-selective imaging. In: Ultrasonics, 2015, 60, S. 1-5.
  • SOLODOV, I., M. RAHAMMER, D. DERUSOVA and G. BUSSE: Highly-efficient and noncontact vibro-thermography via local defect resonance. In: Quantitative InfraRed Thermography Journal, 2015, 12(1), S. 98-111.
  • FEY, P., BUSSE, G. und M. KREUTZBRUCK: Ultraschalldoppelbrechung, eine Methode zur Charakterisierung der anisotropen Schädigung in CFK. In: DACH-Jahrestagung. Salzburg, 2015
  • SPRINGMANN, M., FEY, P., BUSSE, G. und M. KREUTZBRUCK: Reduktion von Abbildungsfehlern bei luftgekoppeltem Ultraschall mit einseitigem Zugang. In: DACH-Jahrestagung. Salzburg, 2015
  • FEY, P., MICHAELIS, D., MIDDENDORF, P.. BUSSE, G. und M. KREUTZBRUCK: NON-DESTRUCTIVE MONITORING OF DAMAGE IN CFRP USING ULTRASONIC BIREFRINGENCE. In: SPE ANTEC TM Orlando. Orlando, 2015, pp. 583 – 590
  • FEY, P., BUSSE, G.  und M. KREUTZBRUCK: Elastische Wellen zur Verfolgung der Ermüdung von Faser-Kunststoff-Verbunden. In: 24. Stuttgarter Kunststoffkolloquium, 2015
  • FEY, P., MICHAELIS, D., MIDDENDORF, P., BUSSE, G. und M. KREUTZBRUCK: Charakterisierung anisotroper Schädigung in CFK mittels Akustischer Doppelbrechung. In: 24. Stuttgarter Kunststoffkolloquium, 2015, pp. 73 – 79
  • GOEBEL, L und C. BONTEN: Neue biobasierte Filamente für das 3D-Druckverfahren FDM (24. Stuttgarter Kunststoffkolloquium 25. - 26. Februar 2015). Stuttgart 2015
  • AVILA, A. und C. BONTEN: Aufschmelzleistung eines Einschneckenextruders mit genuteter Plastifizierzone. 24. Stuttgarter Kunststoffkolloquium, Stuttgart, Germany, 2015
  • KAST, O. und C. BONTEN: Schnelllaufende Einschneckenextruder mit genuteter Plastifizierzone (22. Stuttgarter Kunststoff-Kolloquium Stuttgart 16. - 17. März 2015). 1. Aufl. Stuttgart 2015 – ISBN: 978-3-00-048562-6
  • KAST, O. und C. BONTEN: Vorhersage des Trocknungsverhaltens hygroskopischer Kunststoffe (22. Stuttgarter Kunststoff-Kolloquium Stuttgart 16. - 17. März 2015). 1. Aufl. Stuttgart 2015 – ISBN: 978-3-00-048562-6
  • HEYN, J. und C. BONTEN: Nanopartikel als Fließhilfe für Polyamid 6.6, (24. Stuttgarter Kunststoff-Kolloquium Stuttgart 25. - 26. Februar 2015). 1. Aufl. Stuttgart, 2015
  • AVILA, J. und C. BONTEN: Aufschmelzleistung eines Einschneckenextruders mit genuteter Plastifizierzone, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 43 – 50
  • KOSLOWSKI, T. und C. BONTEN: Neue Inlinie-Messverfahren zur Bewertung von Verarbeitungshilfsstoffen im Spritzgießprozess, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 87 – 94
  • WILLEMS, F. und C. BONTEN: Einfluss der Verarbeitung auf die Faserlänge in faserverstärkten Kunststoffbauteilen, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 95 – 102
  • MUSIALEK, M., GEIGER, K. und C. BONTEN: Modellierung und Vorhersage des Fließverhaltens hochgefüllter Kunststoffe, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 103 – 110
  • NEUBIG, B. und C. BONTEN: Modellbasierte Temperaturmessung für die Thermoformprozessführung, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 111 – 118
  • NEUBIG, B. und C. BONTEN: Thermoformen: Simulation der Wärmestromverteilung zur Berechnung der Halberzeugerwärmung, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 119 – 125
  • LANDSECKER, K., NEUBIG, B. und C. BONTEN: Materialcharakterisierung für die Thermoformsimulation, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 127 – 131
  • KOSLOWSKI, T. und C. BONTEN: Einfluss des Aufheizverhaltens auf die mechanischen Eigenschaften von endlosfaserverstärkten Thermoplasten, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 245 – 252
  • MUSIALEK, M., NEUBIG, B. und C. BONTEN: Modifiziertes Polyamid 6.6 für das Thermo- und Blasformen, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 279 – 283
  • BENZ, J., POINDL, M., KROH, M. und C. BONTEN: Polyamid 6/Polyether-Blockcopolymere als Schlagzähmodifikatoren in Polyamid 6, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 293 – 298
  • GOEBEL, L. und C. BONTEN: Kristallisationsverhalten von Polyhydroxybutyrat (PHB), 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 319 – 324
  • SKRABALA, O. und C. BONTEN: Füllstofforientierung – Modellvalidierung für plättchenförmige Füllstoffe, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 343 – 350
  • SKRABALA, O. und C. BONTEN: Erweiterung des Hatta-Taya-Modells zur Berechnung der Wärmeleitfähigkeit, 24. Stuttgarter Kunststoffkolloquium 25. – 26. Februar 2015, S. 351 – 357
  • HEYN, J. und C. BONTEN: Medieneinfluss auf die bruchmechanischen Eigenschaften von Polyamid, (24. Stuttgarter Kunststoff-Kolloquium Stuttgart 25. - 26. Februar 2015). 1. Aufl. Stuttgart, 2015
  • CELIK, O. und C. BONTEN: Dreidimensionale Simulation der genuteten Einzugszone eines Einschneckenextruders (24. Stuttgarter Kunststoffkolloquium Stuttgart 25. - 26. Februar 2015). Stuttgart, 2015
  • CELIK, O., ERB, T., und C. BONTEN: Charakterisierung dreidimensionaler dispersiver Mischvorgänge in Einschneckenextrudern (24. Stuttgarter Kunststoffkolloquium Stuttgart 25. - 26. Februar 2015). Stuttgart, 2015
  • CELIK, O. und C. BONTEN: Three-dimensional Simulation of a Single-screw Extruder’s Grooved Feed Section. In: 29th Regional Conference of the Polymer Processing Society 21. 25.09.2015. Graz, 2015
  • ERB, T., CELIK, O. und C. BONTEN: Three-dimensional Characterization of Dispersive Mixing in Single-screw Extruders. In: 29th Regional Conference of the Polymer Processing Society 21. 25.09.2015. Graz, 2015
  • CELIK, O. und C. BONTEN: Simulative Auslegung von Werkzeugen für die Kabelextrusion. In: VDI Kabelextrusion 09. 10.12.2015. Nürnberg, 2015
  • FORMISANO, B., GÜNTHER, P., NIEKEN, U. und C. BONTEN: Extrudierte zeolithische Wabenkörper für die sorptive Wärmespeicherung (24. Stuttgarter Kunststoff-Kolloquium 25. - 26. Februar 2015). Stuttgart 2015
  • FORMISANO, B. R., GÖTTERMANN, S., HÄBICH, D., MARMETSCHKE, M., KROH, M. und C. BONTEN: Recycled Material for Demanding Requirements – Compounding of Cast Polyamides for Extrusion. Zeitschrift Kunststoffe international Ausgabe 3 (2015), S. 49 - 52
  • FORMISANO, B. R., GÖTTERMANN, S., HÄBICH, D., MARMETSCHKE, M., KROH, M. und C. BONTEN: Rezyklat für hohe Anforderungen – Aufbereitung von Gusspolyamid für die Extrusion. Zeitschrift Kunststoffe Ausgabe 2 (2015), S. 75 - 80
  • GÖTTERMANN, S., BONTEN, C., KLOEPPEL, A. und F. BRÜMMER: Marine Littering – Auswirkungen und Abbauverhalten, (24. Stuttgarter Kunststoffkolloquium Stuttgart 25. - 26. Februar 2015). 1. Aufl. Stuttgart, 2015
  • GÖTTERMANN, S.; WEINMANN, S. und C. BONTEN: Standau, T.; Altstädt, V.: Modifiziertes Polylactid für die Schaumextrusion, (24. Stuttgarter Kunststoffkolloquium Stuttgart 25. - 26. Februar 2015). 1. Aufl. Stuttgart, 2015
  • FORMISANO, B.; GÖTTERMANN, S. und C. BONTEN: Recycling von Gusspolyamid-Abfällen auf einem Doppelschneckenextruder, (24. Stuttgarter Kunststoffkolloquium Stuttgart 25. - 26. Februar 2015). 1. Aufl. Stuttgart, 2015
  • BONTEN, C. und O. KAST: Resource Efficiency in Plastics Technology (Vortrag), Helsinki, 15. Januar 2015
  • GOEBEL, L. und C. BONTEN: More biobased plastics for 3D-Printing (European Bioplastics Conference December 2 - 3, 2014). Brussels 2014
  • HEYN, J. und C. BONTEN: Feuchtigkeitseinfluss auf die fließbruchmechanischen Eigenschaften von PA6-Kautschuk-Blends.Zeitschrift Kunststofftechnik, Ausgabe 4 (2014), S. 176 - 194
  • KROH, M und C. BONTEN: Mischvorgänge sichtbar gemacht. In: Kunststoffe 7/2014, S. 74 - 77 PDF
  • FORMISANO, B., WEINERT, M., GÜNTHER, P., NIEKEN, U. und C. BONTEN: Extrudierte zeolithische Wabenkörper für Sorptionsspeicher. In: EuroHeat&Powert 43 (2014), Heft 7-8, S. 17 - 19
  • C. BONTEN:  Kunststofftechnik. Einführung und Grundlagen. 1. Aufl. Print-ISBN: 978-3-446-44093-7, E-Book-ISBN: 978-3-446-44171-2, Carl Hanser Verlag, München. Juni 2014
  • BONTEN, C. und E. VON WEIZSÄCKER: Ressourceneffizienz mit Kunststofftechnik, Carl Hanser Verlag, München. Juni 2014 PDF
  • C. BONTEN: Generation Zero, Bioplastics Magazine 04/14, Vol. 9, S. 36 - 37
  • C. BONTEN: Treiber für die Werkstoffentwicklung, Plast Messeguide, Sonderausgabe Fakuma 2014, S. 68 – 71
  • SOLODOV, I., M. RAHAMMER und N. GULNIZKIJ: Highly-Sensitive and Frequency-Selective Imaging of Defects via Local Defect Resonance. In: The e-Journal of Nondestructive Testing, 2014, 19(12). http://www.ndt.net/events/ECNDT2014/app/content/Paper/138_Solodov.pdf
  • GOEBEL, L. und C. BONTEN: More biobased plastics for 3D-Printing (European Bioplastics Conference 2. - 3. December 2014). Brussels 2014
  • GOEBEL, L. und C. BONTEN: 3D-Drucken von Biokunststoffen, Prozesstechnik chemie & more 05.14, S. 20 – 23
  • GOEBEL, L. und C. BONTEN: What is 3D printing?, bioplastics magazine.com 06/2014, S. 16 – 17
  • POINDL, M. und C. BONTEN: Die reaktive Extrusion von vernetzten Blockcopolymeren – Potential als Schlagzähmodifikator für PA6, Aufbereitungstechnik 2014, S.67-76, ISBN 978-3-18-234335-6
  • KAST, O., GEIGER, K., GRÜNSCHLOSS, E. und C. BONTEN: Analysis of Pellet Shaping Kinetics at the Die Opening in Underwater Pelletizing Processes. In: Polym Engineering and Science (2014), DOI: 10.1002/pen.23988
  • UHRIG, M., KROH, M., BONTEN, C., MUNKES, P. und R. KUHN: Making Mixing Transparent, Kunststoffe international 7 (2014), S. 44 - 47
  • SKRABALA, O. und C. BONTEN: Enhanced Thermal Conductivity in Plate-shaped Polymer Part. In AIP Conference Proceedings 1593, 424 (2014) 
  • BONTEN, C. und O. SKRABALA: Dehnungsbezogene Auslegung von Kunststoffen: Neue Methode zur Kennwertermittlung (kunststoffe+SIMULATION 2014 8. - 9. April 2014). München, 2014
  • GOEBEL, L. und C. BONTEN: Influence of the phase morphology on the weldability of PLA/PBAT-blends by using butt-welding. In AIP Conference Proceedings (2014)
  • KAST, O., MUSIALEK, M, GEIGER, K. und C. BONTEN: Influences on Particle Shape in Underwater Pelletizing Processes, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 20 – 23 (rev.)
  • GOEBEL, L. und C. BONTEN: Influences of the Phase Morphology on the Weldability of PLA/PBAT-Blends by Using Butt-Welding, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 312 - 315 (rev.)
  • SKRABALA, O. und C. BONTEN: Enhanced Thermal Conductivity in Plate-shaped Polymer Parts, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 424 – 427 (rev.) 
  • EPPLE, S. und C. BONTEN: Production of Continuous Fiber Thermoplastic Composites by in-situ Pultrusion, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 454 – 457 (rev.)
  • ERB, T., GEIGER, K. und C. BONTEN: Mixing Processes – Influence of the Viscosity Model on Flow Calculations, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 549 – 555 (rev.)
  • POINDL, M. und C. BONTEN: Morphological Studies on Block Copolymer Modified PA 6 Blends, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 654 – 657 (rev.)
  • KROH, M., BONTEN, C. und P. EYRER: Improvement of Mechanical Properties by Additive Assisted Laser Sintering of PEEK, Proceedings of PPS-29 (2014) AIP Publishing LLC 978-0-7354-1227-9, S. 724 – 727 (rev.)
  • HEYN, J. und C. BONTEN: Polypropylen-Pest kann vorhergesagt werden, K-Zeitung Ausgabe 6, 28. März 2014, S. 18 – 19
  • POINDL, M. und C. BONTEN: Reactive Extrusion of Cross Linked Block Copolymers-Structure and Potential as Impact Modifier for PA 6, ANTEC 2014
  • WILLEMS, F., MAURI, J. und C. BONTEN: Additive Fertigung: 3D-Druck. Zusätzlicher Schwung durch Privatanwender, Kunststoffe 2014, 3, 104 - 106. Carl Hanser Verlag, München. März 2014 - PDF
  • GEIER, S. und C. BONTEN: Mechanical and Morphological Properties of a Ternary Polyamide 6 Nanocomposite With Optimized Stiffness/Toughness Performance, Polymer Engineering & Science, Vol. 54, No. 2, S.  247 - 254, Print: ISSN 0032-3888,Online: ISSN 1548-2634
  • GEIGER, K., GRÜNSCHLOß, E., MARTIN, G. und E. PLATZ: Scher- und Dehndeformationen von Kunststoffschmelzen im Keilspalt, Chemie Ingenieur Technik (2013), Nr. 12, S. 1904 - 1913, ISSN 1522-2640
  • GOEBEL, L. und C. BONTEN: Einfluss der Phasenmorphologie auf die Schweißbarkeit von Biokunststoffen, Aufbereitungstechnik 2013, S. 109 - 120, ISBN 978-3-18-234328-8
  • MUSIALEK, M., GEIGER, K., KAST, O. und C. BONTEN: 22nd Conference and Workshop on Rhoelogy of Bulding Materials, Regensburg March 6 - 7, 2013, Applied Rhoelogy, 3-2013, S. 183 - 184, ISSN1617-8106
  • NEUBIG, B. und C. BONTEN: Laser verbessert Wanddickenverteilung, Kunststoffe (2013), Nr. 5, S. 32 - 36
  • C. BONTEN: Alles Biokunststoff, oder was?, Coating International, 10-2013, S. 16 - 18, ISSN 0590-8450
  • MYRACH, P., MAIERHOFER, C., REISCHEL, M., BUSSE, G., HOLTMANN, N. und M. RAHAMMER: Standardisierung der Lockin-Thermografie: Vorstellung des TNS-Projektes und Auswahl der Probekörper. In: Thermografie-Kolloquium 2013. Stuttgart, 2013.
  • RAHAMMER, M. und G. BUSSE: Zerstörungsfreie Prüfung an großen Leichtbauteilen. In: 23. Stuttgarter Kunststoffkolloquium. Stuttgart, 2013.
  • RAHAMMER, M., P. MENNER und G. BUSSE: Thermal waves for NDE of aircraft: comparison of lockin thermography and lockin interferometry. In: Quantitative InfraRed Thermography Journal, 2013, 10(1), S. 42-54.
  • C. BONTEN: Internationale Kunststoffmesse K´ fokussiert biogene Materialien, MaschinenMarkt, Ausgabe 40, Sep. 2013
  • KEMPF, M., SKRABALA, O. und V. ALTSTÄDT:  Acoustic emission analysis for characterisation of damage mechanisms in fibre reinforced thermosetting polyurethane and epoxy, Elsevier Composites (September 2013)
  • NAUMANN, S., EPPLE, S., BONTEN, C., und M.R. BUCHMEISER: Polymerization of ε-Caprolactam by Latent Precatalysts Based on Protected N-Heterocyclic Carbenes,  Juni 2013
  • GEIER, S. und C. BONTEN: Mechanical and Morphological Properties of a Ternary Polyamide 6 Nanocomposite with Optimized Stifness/Toughness Performance, Polymer Engineering & Scienc Journal (2013)
  • NEUBIG, B. und C. BONTEN: Laserverbesserte Wanddickenverteilung, Kunststoffe 2013, 5, S. 32 - 36
  • ERB, T., und C. BONTEN: A Novel Method for the Evaluation of Particle Tracking Simulations of Mixing Processes, ANTEC 2013
  • J. HEYN: Kunststoffe in elektronischen Geräten (7. Tagung Elektronikkühlung 23. - 24. April 2013). Stuttgart, 2013
  • ERB, T. und C. BONTEN: Mischprozesse – Einfluss der Fließgesetze auf Strömungsberechnungen, Tagungsband 23. Stuttgarter Kunststoff-Kolloquium (2013), ISBN 978-3-00-041203-5, S. 57 - 64
  • ERB, T. und C. BONTEN: Mischprozesse – Neue Auswertemethodik für Particel-Tracking Simulation, Tagungsband 23. Stuttgarter Kunststoff-Kolloquium (2013), ISBN 978-3-00-041203-5, S. 65 - 72
  • SKRABALA, O. und C. BONTEN: Bestimmung der kritischen Dehnung mittels Schallemissionsanalyse (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • SKRABALA, O. und C. BONTEN: Gesteigerte Wärmedurchleitung bei plattenförmigen Kunststoffbauteilen (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • KROH, M., BONTEN, C. und P. EYERER: Improvement of mechanical properties by additive assisted laser sintering of PEEK (29th Conference of the Polymer processing Society (PPS) Nuremberg/Germany July 15 - 19 2013). Nürnberg 2013
  • KROH, M., BONTEN, C. und P. EYERER: Influences on morphology in laser sintered PEEK materials (28th Conference of the Polymer processing Society (PPS) Pattaya/Thailand December 11 - 15 2012). Pattaya 2012
  • KROH, M., BONTEN, C. und P. EYERER: Einfluss der Prozessparameter beim ASLS auf die Morphologie von Polyetheretherketon (23. Stuttgarter Kunststoff-Kolloquium 6. - 7. März 2013). Stuttgart 2013
  • KROH, M., BONTEN, C. und P. EYERER: Optimierung der mechanischen Eigenschaften beim ASLS von Polyetheretherketon (23. Stuttgarter Kunststoff-Kolloquium 6. - 7. März 2013). Stuttgart 2013
  • HEYN, J. und C. BONTEN: Nachweis der thermisch-oxidativen Beständigkeit von Polypropylen, (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). 1. Aufl. Stuttgart, 2013
  • ZGAVERDEA, A., KROH, M., GOEBEL, L. und C. BONTEN: Thermoplastisches Bio-Polyurethan als Schlagzähmodifizierer für Polylactid (23. Stuttgarter Kunststoff-Kolloquium 6. - 7. März 2013). Stuttgart 2013
  • GOEBEL, L. und C. BONTEN: Einfluss der Phasenmorphologie auf die Schweißbarkeit von Biokunststoffen (23. Stuttgarter Kunststoff-Kolloquium 6. - 7. März 2013). Stuttgart 2013
  • POINDL, M. und C. BONTEN: Partikelgrößen/Zähigkeits-Korrelation eines PA 6-Blockcopolymer-Blends (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • POINDL, M. und C. BONTEN: Temperatur/Eigenschafts-Korrelation von PA 6-Blockcopolymer-Blends (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • KOSMANN, N., FEY, P., RHEINFURTH, M., PROTZ, R., GREIF, R., SCHMIDT, F., SCHULTE, K., BUSSE, G.; HUFENBACH, W., GUDE, M. und P. HORST: Einfluss von Defekten auf das Werkstoff- und Strukturverhalten von faserverstärkten Kunststoffen und Leichtbaustrukturen. (Nationales Symposium SAMPE Deutschland e. V. Hamburg 27.02. - 28.02.2013). 1. Aufl. Hamburg :  TuTech Innovation GmbH, 2013
  • MUSIALEK, M., GEIGER, K., POINDL, M. und C. BONTEN: Rheologische Eigenschaften eines PA 6-Blockcopolymer-Blends, in: 23. Kunststoff-Kolloquium, Stuttgart, 2013, ISBN: 978-3-00-041203-5
  • MUSIALEK, M. und C. BONTEN: Verhalten esterbasierter thermoplastischer Polyurethane in der Schmelze, in: 23. Kunststoff-Kolloquium, Stuttgart, 2013, ISBN: 978-3-00-041203-5
  • EPPLE, S. und C. BONTEN: RIM-Pultrusion zur Herstellung endlosglasfaserverstärkter PA 6-Halbzeuge (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • EPPLE, S. und C. BONTEN: Analyse der anionischen Polymerisation aus verarbeitungstechnischer Sicht (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • KOSLOWSKI, T. und C. BONTEN: Widerstandserwärmung von endlosfaserverstärkten Thermoplasten (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • KAST, O., MUSIALEK, M., GEIGER, K. und C. BONTEN: Einflussfaktoren auf die Partikelform bei der Unterwassergranulierung, in: 23. Kunststoff-Kolloquium, Stuttgart, 2013, ISBN: 978-3-00-041203-5
  • STARY, Z., MUSIALEK, M. und H. MÜNSTEDT: Shape Recovery versus Breakup of Deformed Droplets in a Polymer Blend after Uniaxial Extension, Macromolecular Materials and Engineering, 2011, 296, 414 – 42
  • JAEGER, A., MUSIALEK, M. und M. SCHULTE: Maßgeschneiderte Polyamide für das physikalische Schäumen, Kunststoffe, 2010, 10, S. 227 - 231
  • NEUBIG, B. und C. BONTEN: Thermoformen – Verbesserte Wanddickenverteilung durch lokale Halbzeugerwärmung mittels Laserstrahlung (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • NEUBIG, B. und C. BONTEN: Transmissions- und Emissionsgrade von Kunststoffhalbzeugen für die berührungslose Temperaturmessung beim Thermoformen (23. Stuttgarter Kunststoff-Kolloquium Stuttgart 6. - 7. März 2013). Stuttgart, 2013
  • POINDL, M. und C. BONTEN: Ein neuer Weg zum Kompromiss, Kunststoffe 1 (2013), S. 53 - 55
  • M. RAHAMMER, M. MENNER und G. BUSSE: Thermal waves for NDE of aircraft: comparison of lockin thermography and lockin interferometry. QIRT-Journal, V. 10, No 1, 2013
  • I. SOLODOV und G. BUSSE: Resonance ultrasonic thermography: Highly efficient contact and air-coupled remote modes. Appl. Phys. Lett. 102, 061905 (2013)
  • NEUBIG, B. und C. BONTEN: Local Heating using Laser Radiation for improved Wall Thickness Distribution of Thermoformed Parts, Proceedings der 28. PPS-Tagung, Pattaya/Thailand December 11 - 15 2012
  • ERB, T., GEIGER, K. und C. BONTEN: Numerical Calculation of Distributive Mixing of Materials with a Rheological Yield Point, Proceedings der Polychar 20, Dubrovnik 26.-30.3.2012, ISBN 978-953-6470-57-0, S. 28
  • C. BONTEN: „Verpackungen aus Biokunststoff“, Wir packen es!, Kunststoff-Museums-Verein (2012), S. 100 – 103
  • WIDMAYER, S., FRITZ, H.G. und C. BONTEN: „Feuchte vereinzelt Naturfasern“, Kunststoffe 12 (2012), S. 71 - 74
  • KASCHTA, J., MUSIALEK, M., BÖSE, H. und D.W.  SCHUBERT: Magnetorheological fluids and elastomers based on injection moldable liquid silicone, Dubrovnik, 20. Polychar, 2012
  • HOLTMANN, N., ARTZT, K., GLEITER, A., STRUNK, H. und G. BUSSE: Iterative improvement of lockin-thermopgraphy results by a temporal and spatial adaption of optical excitation. QIRT-Journal V. 9, No 2, 2012
  • BUSSE, G. und I. SOLODOV: Innovative zerstörungsfreie Prüfung für Luftfahrtanwendungen, Themenheft Forschung der Universität Stuttgart, 2012
  • FEY, P., FRICK, J., DÖRING, D., GRÜNER, F. und G. BUSSE: Preliminary results on non-contact characterisation of weathered mineral materials by surface acoustic waves. In: Paipetis, A. S. ; Matikas, T. E. ; Aggelis, D. G. ; Hemelrijck, D. Van (Hrsg.): Emerging Technologies in Non-Destructive Testing V: CRC Press/Balkema, 2012 – ISBN 978-0-415-62131-1 , S. 271 – 274
  • SOLODOV, I., FEY, P. und G. BUSSE: New opportunities for ultrasonic characterization of stiffness anisotropy in composite materials. In: Paipetis, A. S. ; Maitikas, T. E. ; Aggelis, D. G. ; Hemelrijck, D. Van (Hrsg.): Emerging Technologies in Non-Destructive Testing V: CRC Press/Balkema, 2012 — ISBN 978-0-415-62131-1 , S. 259 – 264
  • MENNER, P., RIEGERT, G. und G. BUSSE: ZfP an CFK mit wirbelstromangeregter Lockin-Thermografie und Lockin-Shearopgrafie,  Carbon Composites e. V., Augsburg, 2012
  • MENNER, P., FEY, P., RHEINFURTH, M., HOLTMANN, N. und M. RAHAMMER: Innovative Non-Destructive Testing Methods for Fibre-Plastic Composites, Proc. Stuttgarter Lasertage, 2012
  • RHEINFURTH, M., FEY, P., ALLINGER, S. und G. BUSSE: Ultrasonic birefringence as a measure of mechanically induced fatigue damage in laminated composites, Accepted for publication in: International Journal of Fatigue, 2012
  • RHEINFURTH, M., KOSMAN, N., SAUER, D., BUSSE, G. und K. SCHULTE: Lamb waves for non-contact fatigue state evaluation of composites under various mechanical loading conditions, Composites: Part A, V. 43, 2012, pp. 1203 - 1211
  • SCHMIDT, F., RHEINFURTH, M., PROTZ, R., HORST, P., BUSSE, G., GUDE, M. und W. HUFENBACH: Monitoring of muliaxial fatigue damage evolution in impacted conposite tubes using non-destructive evaluation, Composites: Part A, V. 43, 2012, pp. 537 - 546
  • SCHMIDT, F., RHEINFURTH, M., HORST, P. und G. BUSSE: Multiaxial fatigue behaviour of GFRP with evenly distributed or accumulated voids monitored by various NDT methodologies, International Journal of Fatigue V. 43, 2012, pp. 207 - 216
  • SCHMIDT, F., RHEINFURTH, M., HORST, P. und G. BUSSE: Effects of local fibre waviness on damage mechanisms and fatigue behaviour of biaxially loaded tube specimens, Composites Science and Technology, V. 72, 2012, pp. 1075 - 1082
  • RHEINFURTH, M., SCHMIDT, F., PROTZ, R., HORST, P., BUSSE, G., GUDE, M. und W. HUFENBACH: Evaluation of Fatigue Damage in Composites with Various Defects Using Air-coupled Guided Waves, 18th World Conference on Nondestructive Testing, April 2012, Durban, South Africa
  • EREN, E., KURAMA, S. und I. SOLODOV: Characterization of porosity and defect imaging in ceramic tile using ultrasonic inspecitons, Ceramics International, V. 38, 2012, pp. 2145 - 2151
  • SOLODOV, I., FEY, P. und G. BUSSE: Multi-frequency defect-selective nonlinear imaging and NDT. In: Paipetis, A. S.; Matikas, T. E.; Aggelis, D. G.; Hemelrijck, D. V. (Eds.): Emerging Technologies in Non-Destrucitve Testing V: CRC Press/Balkema, 2012 - ISBN 978-0-415-62131-1, pp. 313 - 318
  • SOLODOV, I., DÖRING, D., RHEINFURTH, M. und G. BUSSE: New Opportunities in Ultrasonic Characterization of Stiffness Anisotropy in Composite Materials, In: Büyüköztürk, O.; Tasdemir, M. A.; Günes, O.; Akkya, Y. (Eds.): Proceedings of the International Symposium on Nondestructive Testing of Materials and Structures, Istanbul, Turkey, RILEM Bookseries, Springer, Dordrecht, The Netherlands, 2012
  • SOLODOV, I., KROHN, N. und G. BUSSE: Nonlinear Ultrasound: A Novel Approach to Flaw Detection and Imaging, In: Büyüköztürk, O.; Tasdemir, M. A.; Günes, O.; Akkya, Y. (Eds.): Proceedings of the International Symposium on Nondestructive Testing of Materials and Structures, Istanbul, Turkey, RILEM Bookseries, Springer, Dordrecht, The Netherlands, 2012
  • SOLODOV, I., FEY, P. und G. BUSSE: New opportunities for ultrasonic characterization of stiffness anisotropy in composite materials. In: Paipetis, A. S.; Matikas, T. E.; Aggelis, D. G.; Hemelrijck, D. V. (Eds.): Emerging Technologies in Non-Destrucitve Testing V: CRC Press/Balkema, 2012 - ISBN 978-0-415-62131-1, pp. 259 - 264
  • SOLODOV, I., BAI, J., BEKGULYAN, S. und G. BUSSE: A Local Defect Resonance to Enhance Wave-Defect Interaction in Nonlinear Spectroscopy and Ultrasonic Thermography, Proc. 18th World Conference on Nondestructive Testing, April 2012, Durban, South Africa
  • SOLODOV, I., RAHAMMER, M. und G. BUSSE: A local defect resonance for linear and nonlinear ultrasonic thermography, Quantitative Infrared Thermography 11, Napoli, 2012,  ID-385
  • KROH, M., BONTEN, C. und P.  EYERER: Influences on morphology in laser sintered PEEK materials (28th Conference of the Polymer processing Society (PPS) Pattaya/Thailand December 11 - 15 2012). Pattaya 2012
  • SKRABALA, O. und C. BONTEN: Kritische Dehnung als Parameter für die Versagensbestimmung. In: Kunststoffe (2012), Nr. 09/2012, S. 82 - 85
  • S. EPPLE, E. GRÜNSCHLOSS und C. BONTEN: Mischergebnisse im Einschneckenextruder, Kunststoffe 4 (2012), S. 58 - 61
  • KROH, M. und C. BONTEN: Aufbereitung am neuen IKT, 37. VDI-Jahrestagung Aufbereitungstechnik, Baden-Baden, 22. - 23. November 2011
  • KLEMT, M., BINJUNG, B., GEIER, S. und C. BONTEN: In-situ-Aufheizung von CFK-Organoblechen, Kunststoffe 11 (2011), S. 78 - 82
  • BEILHARZ, F., NEUBIG, B. und C. BONTEN: Wareneingangskontrolle für Halbzeuge, Kunststoffe 10 (2011), S. 184 - 187
  • ZHANG, D. und C. BONTEN: Reaktive Aufbereitung vermindert „Sagging“-Effekt, Kunststoffe 9 (2011), S. 58-64
  • KROH, M., BONTEN, C. und S. WEINMANN: Gut für die Umwelt, Kunststoffe 8 (2011), S. 30-35
  • C. BONTEN: Wozu eigentlich Biokunststoffe? – Grundlagen und Überblick -, 14. Problemseminar „Polymermischungen“, Halle, 14. - .15. September 2011
  • GEIER, S. und C. BONTEN: Verbesserung der mechanischen Eigenschaften eines ternären Polyamid 6-Verbundwerkstoffes durch die Einarbeitung nanoskalig strukturierter Füllstoffe, 14. Problemseminar „Polymermischungen“, Halle, 14. - 15. September 2011
  • ZGAVERDEA, A., KROH, M. und C. BONTEN: Schlagzähmodifizierung von Polylactid mittels thermoplastischem Polyurethan, 14. Problemseminar „Polymermischungen“, Halle, 14. - 15. September 2011
  • GEIGER, K., MARTIN, G. und A. SOBOTTA: Relaxationszonen in Werkzeugen, Kunststoffe 6 (2011), S. 44 - 49
  • GEIER, S. und C. BONTEN: Schlagzäh und steif zugleich, Kunststoffe 7 (2011), S. 90 - 92
  • ZHANG, D., FRITZ, H.-G. und C. BONTEN: Reaktivcompoundierung von PA 66 für die Extrusion dickwandiger Hohlprofile, Zeitschrift Kunststofftechnik, Ausgabe 5 (2011), S. 202 - 224
  • ERB, T. und C. BONTEN: Numerische Untersuchungen von Mischteilen für Einschneckenextruder. „22. Stuttgarter Kunststoff-Kolloquium“, Stuttgart, 16. - 17. März 2011
  • KROH, M., BONTEN, C. und P. EYERER: Einfluss der Prozessparameter auf das Additivunterstützte Lasersintern von Hochleistungsthermoplasten. „22. Stuttgarter Kunststoff-Kolloquium“, Stuttgart, 16. - 17. März 2011
  • ZHANG, D., FRITZ, H.-G. und C. BONTEN: Modifikation der rheologischen Eigenschaften von PA66 im reaktiven Extrusionsprozess. „22. Stuttgarter Kunststoff-Kolloquium“, Stuttgart, 16. - 17. März 2011
  • POINDL, M. und C. BONTEN: Synthese eines PA 6/Polyether-Blockcopolymers durch kontinuierlich anionische Polymerisation. „22. Stuttgarter Kunststoff-Kolloquium“, Stuttgart, 16. - 17. März 2011
  • GEIER, S., POINDL, M., BONTEN, C. und P. EYERER: The potential of nano-structured filler materials to improve the stiffness/toughness balance of PA 6. “Antec 2011”, Boston, 1. - 5. Mai 2011
  • KROH, M., BONTEN, C. und P. EYERER: Effects of process parameters on additive assisted laser sintering of polyetheretherketone. “Antec 2011”, Boston, 1. - 5. Mai 2011
  • BEILHARZ, F., BONTEN, C. und P. EYERER: Influence of processing conditions on the thermoformability of PP-sheet material. “Antec 2011”, Boston, 1. - 5. Mai 2011
  • POINDL, M., GEIER, S. und C. BONTEN: Continuous Anionic Polymerisation of a New Impact Modifier for PA 6. “PPS 27”, Marrakech, Marokko, 10. - 14. Mai 2011
  • ERB, T., und C. BONTEN: Online quality mamagement for injection moulding compounders. „PPS 27”, Marrakech, Marokko, 10. - 14. Mai 2011
  • BUSSE, G., GLEITER, A. und C. SPIESSBERGER: NDE using Lok-in Thermography: Principle and recent developments, Proceedings NDTMS-2011, Istanbul, 2011.
  • BUSSE, G. und P. MENNER: Dynamische Speckle-Interferometrie für die zerstörungsfreie Prüfung in der Luftfahrt, Proc. Carbon Composites Fachtagung, Augsburg, 2011
  • MENNER, P. und G. BUSSE: NDE with Lockin-Interferometry: Principle and Applications, International Symposium on Nondestructive Testing of Materials and Structures, Istanbul, Turkey, 2011.
  • MENNER, P. und G. BUSSE.: Lockin-interferometric imaging of thermal waves for nondestructive testing, Proc. Optical Measurement Systems for Industrial Inspection, München, 2011
  • MENNER, P. und G. BUSSE: Dynamic shearography for inspection of aerospace structures, Proceedings ETNDT5, Greece, 2011.
  • FEY, P., DÖRING, D., BUSSE, G., FRIC, J. und F. GRÜNER: Prelimenary results on non-contact characterization of weathered mineral materials by surface acoustic waves, Proceedings ETNDT5, Greece, 2011.
  • RHEINFURTH, M., SCHMIDT, F., DÖRING, D., SOLODOV, I., BUSSE, G. und P. Horst: Air-coupled guided waves combined with thermography for monitoring fatigue in biaxially loaded composite tubes, Composites Science and Technology, 71, 600-608, 2011.
  • RHEINFURTH, M. und G. BUSSE: Non-contact ultrasound for single-sided detection of fatigue and defects in composites, Proceedings 18th Conference on composiyte materials, South Korea, 2011.
  • SCHMIDT, F., RHEINFURTH, M., HORST, P. und G. BUSSE: Effects of local fibre waviness on damage mechanisms and fatigue behaviour of biaxially loaded tube specimens, Composites Science and Technology, 2011.
  • SCHMIDT, F., RHEINFURTH, M., PROTZ, P., HORST, P., BUSSE, G., GUDE, M. und W. HUFENBACH: Monitoring of multiaxial fatigue damage in impacted composite tubes using non-destructive testing, Composites, 2011.
  • SOLODOV, I., KROHN N. und G. BUSSE: Nonlinear Ultrasound: A Novel Approach to Flaw Detection and Imaging, Proceedings NDTMS-2011, Istanbul, 2011
  • SOLODOV, I., DÖRING, D., RHEINFURTH, M. und G. BUSSE: New Opportunities in Ultrasonic Characterization of Stiffness Anisotropy in Composite Materials, Proceedings NDTMS-2011, Istanbul, 2011.
  • SOLODOV, I. und G. BUSSE: Nonclassical acoustic nonlinearity: Nonlinear vibrations vs nonlinear waves, Proceeedings 18th International Congress on Sound and Vibrations, Rio de Janeiro, pp. 1 - 8, 2011.
  • SOLODOV, I., FEY, P. und G. BUSSE: Multi-frequency defect-selective imaging and NDT, Proceedings ETNDT5, Greece, 2011.

2010:

  • KROH, M. und P. EYERER: Additive Assisted Laser Sintering of Polyetheretherketone: Influence of Process Parameters and Additives on Morphology Development. “PPS 26”, Conference of the Polymer Processing Society, Banff, Canada, July 8 - 14, 2010 Conf. Proc., paper G08-515
  • GEIER, S., POINDL, M. und P. EYERER: Toughening of PA 6 by fine dispersed nanosized PA 6/Polyether block copolymer particles. “PPS 26”, Conference of the Polymer Processing Society, Banff, Canada, July 8 - 14, 2010 Conf. Proc., paper G09-3

2009:

  • GÖSCHEL, U. und CH. ULRICH: Effect of carbon nanotubes on the crystallization behaviour of UHMWPE. "PPS-25", Conference of the Polymer Processing Society, Goa, India, March 1 - 5, 2009, Conf. Proc., paper submitted
  • GÖSCHEL, U., GEIER, S. und  A. GEENEN VAN: Nanodispersed impact modifiers in highly crystalline PA 6. "PPS-25", Conference of the Polymer Processing Society, Goa, India, March 01-05, 2009, Conf. Proc., paper submitted
  • GÖSCHEL, U. und C. ULRICH: Mechanical relaxation of medical grade UHMWPE of different crosslink density as prepared by electron beam irradiation, Journal of Applied Polymer Science Volume 113, Issue 1, Date: July 5, 2009, pp 49 - 59
  • RAMM, A. und H.-G. FRITZ: Der neuartige „First In – First Out“ Spritzgieß-compounder mit Echtzeit-Qualitätserfassung, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • HÄRTER, C. und H.-G. FRITZ: Verstärkung thermoplastischer Vulkanisate durch Inkorporierung von PET-Fasern, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • F. BEILHARZ: Einfluss der Herstellungsbedingungen auf die Thermoformeigenschaften von Polypropylen Halbzeugen, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • KROH, M. und P. EYERER: Additiv unterstütztes Lasersintern von Polyetheretherketon, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • K. GEIGER: Ein neues heuristisches Fließgesetz, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • E. GRÜNSCHLOSS: Vergleichende experimentelle Untersuchungen verschiedener Scher- und Mischteile für Einschneckenextruder, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • DÖRING, D., SOLODOV, I. und G. BUSSE: Werkstoffcharakterisierung und Prozessverfolgung mit luftgekoppelten Platten- und Oberflächenwellen, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • GEIER, S., GÖSCHEL, U. und M. WEBER: Schichtsilikatverstärkte PA6-Nanocomposites Einfluss von Verarbeitungsparametern, Molmasse und Schichtsilikatmodifikation auf Struktur und mechanische Eigenschaften, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • ZHANG, D. und H.-G. FRITZ: Modifikation rheologischer Eigenschaften von Polyamiden mittels Propfungsreaktionen, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • ISOLODOV, I., DÖRING, D. und G. BUSSE: Characterization of Polymer Composites via Birefringent Ultrasound, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • MENNER, P., CIANCIAFARA, P. und G. BUSSE: Lockin-Shearografie zur zerstörungsfreien Prüfung von Faserverbundwerkstoffen, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • GLEITER, A.; SPIESSBERGER, C., HOLTMANN N. und G. BUSSE: Dynamische Thermografie: Prinzip und Anwendungen, 21. Stuttgarter Kunststoffkolloquium, 18. - 19. März 2009
  • HÄRTER, C. FRITZ, H.-G.., TESSIER, N. und K. KOUBA: The Dependence of Wall Thickness on Changes in Material and Process Conditions in Plug Assist Thermoforming, ANTEC 2009 ---- Proceedings of the 67th Annual Technical Conference & Exhibition, Chicago, IL, June 22 - 24.,2009, Society of Plastics Engineers

2008:

  • GEIER, S. und G. RÜB: Eine Frage des Alters, Kunststoffe, Januar 2008
  • F. BEILHARZ: Optimierte Gestaltung von Thermoformwerkzeugen mit T-Form, Kunststoffcluster Fachtagung, 14.02.2008, Salzburg
  • M. KROH: Development of a modified processing technique for selective laser sintering of high temperature resistant polymers with a Nd:YAG-laser. "PPS-24", Conference of the Polymer Processing Society, Salerno, Italy, June 15 - 19, 2008 Conf. Proc., paper S17-342
  • GÖSCHEL, U. und CH. ULRICH: Crystallization of electron beam crosslinked UHMWPE. "PPS-24", Conference of the Polymer Processing Society, Salerno, Italy, June 15 - 19, 2008; Conf. Proc., paper S09-343
  • D. LIEBING: Friction as input data for modelling and optimisation, APT_Pack workshop for industry, Paris, Frankreich, 10. März 2008
  • D. LIEBING: Analyzing Thermoforming Material, 6th European Thermoformig Conference, Berlin, 2008
  • S. GEIER: Lifetime prediction of glass fibre reinforced polyamide 6.6 composites and application to construction parts. "PPS-24", Conference of the Polymer Processing Society, Salerno, Italy, June 15 - 19, 2008; Conf. Proc., paper S19-341

2007:

  • GÖSCHEL, U., LUTZ, W. und N.C. DAVIDSON: The influence of nucleating additive content on the crystallisation in glass short fibre reinforced polyamide 6 composites, Composites Science and Technology, 67, pp 2606 - 2615, 2007
  • KUPPINGER, J., GÖSCHEL, U., REEKSTING, B. und O. VORSTER: Maleic anhydride grafted polypropylene- layered hydrotalcite master batch and resultand nanocomposites prepared by melt intercalation: structure characterization and mechanical properties, Journal of Polymer Engineering, 27 (5), pp 339 - 355, 2007
  • KROH, M., GÖSCHEL, U. und K. TITZSCHLAU: Einfluss von kurzkettigen Copolyamiden auf Verzug und Kristallisation, Poster auf der Hannover-Messe, April 16 - 20, 2007
  • GÖSCHEL, U. und S. GEIER: Effects of short-chain polyamide-sequences on crystallization of polyamide 6, PPS-23, Salvador, Brasilien, 2007, CD-ROM, P10-16
  • LUTZ, W. und U. GÖSCHEL: Morphology and interfaces in PA and PP materials as studied by AFM, PPS-23, Salvador, Brasilien, 2007, CD-ROM, P10-17
  • GÖSCHEL, U. und S. GEIER: Abschnitt 2.1.1.1 Polyethylen (PE) in P. Eyerer, P. Elsner, Th. Hirth (Ed.), H. Domininghaus - Die Kunststoffe und ihre Eigenschaften, Berlin/Heidelberg, Springer Verlag, 7. Auflage, 2007
  • KROH, M., WOICKE, N. und P. EYERER: Lasersintern von Hochleistungspolymeren mittels Nd:YAG-Laser. In: B. Bertsche, H.-J. Bullinger (Hrsg.): Entwicklung und Erprobung innovativer Produkte - Rapid Prototyping. Springer Verlag 2007
  • GÖSCHEL, U., GEIER, S., ULRICH, CH. und G. BUTH: Crystallization of nanostructured polyamid 6 of different strength in polarity (project MS-87), ANKA Synchrotron Radiation Facility Karlsruhe, Annual Report 2007
  • F. BEILHARZ: Eingabeparameter für die Thermoformsimulation mit T-SIM; 24th CADFEM Users' Meeting 2006 International Congress on FEM Technology with 2006 German ANSYS Conference October 25th - 27th, 2006 - Stuttgart Region
  • BEILHARZ, F., KOUBA, K., BLOKLAND, H. und P. EYERER: Experimental investigation of friction, Thermal conductivity and heat transfer and their mathematical description for the thermoforming process simulation; Polymer processing society, Europe/Africa regional meeting 2007, Göteborg-Sweden 28. - 30. August 2007
  • D. LIEBING: Kennwertermittlung als Basis für die Simulation des Thermoformprozesses, SKZ-Lehrgang "Thermoformen 2", 12.06.2007
  • BEILHARZ, F. und D. LIEBING: Optimierte Gestaltung von Thermoformwerkzeugen mit T-ForM, Fachtagung Thermoformen technischer Bauteile, Würzburg, 2007
  • D. LIEBING: POLYSULFON, IN P. EYERER, P. ELSNER, T. HIRTH (HRSG.), H. DOMININGHAUS: Die Kunststoffe und ihre Eigenschaften, Springer Verlag, 7. Auflage
  • A. RODRIGUEZ: POLYARYLETHERSULFONE, IN P. EYERER, P. ELSNER, T. HIRTH (HRSG.), H. DOMININGHAUS: Die Kunststoffe und ihre Eigenschaften, Springer Verlag, 7. Auflage
  • RODRIGUEZ, A. und P. EYERER: Characterisation of the viscoelastic behaviour of fibre reinforced polyamide with growing damage. 23rd Annual Meeting of the Polymer Processing Society, 27. - 31. May 2007, Salvador, Brazil
  • RODRIGUEZ, A. und P. EYERER: Viscoelastic behaviour of short-fibre reinforced polyamide with damage. 16th International Conference on Composite Materials, 8th - 13th July 2007, Kyoto, Japan
  • BEILHARZ, F. und P. EYERER: Optimierte Gestaltung von Thermoformwerkzeugen, Optimised design of thermoforming moulds; 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • LIEBING, D. MARTIN, P.J. und P. EYERER: Untersuchung des Reibungsverhaltens von Kunststoffen unter thermoformähnlichen Bedingungen, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • RODRIGUEZ, A. und P. EYERER: Modellierung des mechanischen Verhaltens von kurzglasfaserverstärktem Polyamid mit Schädigung, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • HEINEMANN, M. und H.-G. FRITZ: Ringöffnungspolymerisation mit beschleunigter Kinetik zur Generierung von Polylactiden, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • SOMMER, M. und H.-G. FRITZ: Besonderheiten bei der Herstellung von faserverstärkten Formmassen auf Basis von Melaminetherharzen, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • WIDMAYER, S. und H.-G. FRITZ: Innovatives Verfahren zur Herstellung von Naturfasercomposites, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • GRÜNSCHLOSS, E. und K. GEIGER: Visualisierung des Schneidevorgangs bei der Unterwassergranulierung, 20. Stuttgarter Kunststoffkolloquium, 14.-15. März 2007
  • GEIGER, K. und E. GRÜNSCHLOSS: Analytische Betrachtung zum Granulatbildungsprozess bei der Unterwassergranulierung, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • RAMM, A. und H.-G. FRITZ: Entwicklung eines Echtzeit-Qualitätsüberwachungssystems für den IMC-Spritzgießcompounder, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • F. BEILHARZ: Optimierte Gestaltung von Thermoformwerkzeugen, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • M. KROH: Einfluss von in Polyamid 6 eincompoundierten kurzkettigen Copolyamiden auf Verzug und Kristallisationskinetik, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • D. LIEBING: Untersuchungen des Reibverhaltens von Kunststoffen unter thermoformähnlichen Bedingungen, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • STOLL, H. und H.-G. FRITZ: Modellierung und Simulation des Spritzprägeverfahrens, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • BUSSE, G., DÖRING, D. und I. SOLODOV: Luftgekoppelte Grenzflächenwellen für die berührungslose Prüfung von dicken Bauteilen, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • SOLODOV, I. und G. BUSSE: Elastic Waves for Monitoring Nonlinear Deformation of Polymers and Composites, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • GERHARD, H., MENNER, P. und G. BUSSE: Neue Möglichkeiten und Anwendungen der Lockin-Speckle-Interferometrie für die zerstörungsfreie Prüfung, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • LARPSURIYAKUL, P. und H.-G. FRITZ: IML-Spritzgießen und seine Rückwirkungen auf die Formteileigenschaften, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • RODRIGUEZ, A. und U. FRITZ: Charakterisierung des mechanischen Verhaltens von kurzglasfaserverstärktem Polyamid mit Schädigung, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • RIEGERT, G., GLEITER, A., SPIESSBERGER, CH. und G. BUSSE: Qualitätsüberwachung von CFK-Bauteilen mit Induktions-Lockin-Thermografie, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • PREDAK, S., SOLODOV, I., GERHARD, H., SCHLATTERER, N. und G. BUSSE: Kombination von ZFP-Verfahren zur Material- und Schädigungscharakterisierung kurzfaserverstärkter Thermoplaste, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • PFLEIDERER, K. und G. BUSSE: Moderne Methoden der zerstörungsfreien Prüfung für textile Faserverbundwerkstoffe, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • U. GÖSCHEL: Polyamide – Neue Möglichkeiten für Verarbeitung und Produkteigenschaften, 20. Stuttgarter Kunststoffkolloquium, 14. - 15. März 2007
  • RAISCH, S. und U. FRITZ: Materialverhalten und Kennwertermittlung von Thermoplasten bei hohen Dehnraten

2006:

  • WOICKE, N., KROH, M. und P. EYERER: Rapid Prototyping of PEEK Parts by the Means of Laser-Sintering, 2. - 6. Juli, PPS-22, Yamagata, Japan (2006)
  • WOICKE, N. und P. EYERER: Finite Elemente Simulation of the Curing process of Epoxy Resins, 2. - 6. Juli, PPS-22, Yamagata, Japan (2006)
  • WOICKE, N., GEIER, S., GÖSCHEL, U. und P. EYERER: Influence of Modern Nucleating Agents on the Crystallization of PA6, 2. - 6. Juli, PPS-22, Yamagata, Japan (2006), Conf. Proc.
  • D. LIEBING: Measurement of tool/polymer friction, 1st APT_Pack seminar, Belfast, April 5, 2006
  • D. LIEBING: Ermittlung mechanischer Kennwerte als Grundlage für die Thermoformsimulation, SKZ-Lehrgang "Thermoformen 2", 5. September 2006
  • RAISCH, S.R., WOICKE, N., BEILHARZ, F. und P. EYERER: Materialverhalten und Kennwertermittlung an thermoplastischen Polymeren bei hohen Dehnraten, Polymerwerkstoffe 2006 in Halle/Saale
  • RODRÍGUEZ, A. und P. EYERER: Characterisation of the mechanical behaviour of fibre reinforced polyamide with damage, Conference on Damage in Composite Materials, Stuttgart, 2006
  • D. LIEBING: Investigation of friction in thermoforming, 2nd APT_Pack seminar, Cascais, Portugal, 2. Oktober 2006
  • GÖSCHEL, U., ULRICH, CH., GEIER, S. und G. BUTH: Isothermal crystallization in UHMWPE biomaterials at defined molecular orientation and crosslinking (project MS-18) ANKA Synchrotron Radiation Facility Karlsruhe, Annual Report 2006
  • U. GÖSCHEL: Kapitel 1: Entstehung von Orientierungen und Eigenspannungen und ihre Untersuchungsmöglichkeiten, in P. Eyerer, Kunststoffkunde-Praktikum, 2006, ISBN 3-8167-6878-4
  • FRITZ, U. und U. GÖSCHEL: Kapitel 5: Thermoanalytische Methoden zur Charakterisierung von Kunststoffen, in P. Eyerer, Kunststoffkunde-Praktikum, 2006, ISBN 3-8167-6878-4
  • F. BEILHARZ: T-Form, Software für optimierte Werkzeugauslegung beim Thermoformen, Kunstoffcluster Fachtagung, 05.12.2006, Kirchdorf

2005:

  • WOICKE, N., WAGNER, T. und P. EYERER: Carbon assisted Laser Sintering of thermoplastic polymers, ANTEC, Boston (2005)
  • RAISCH, S.R. und P. EYERER: Measurement of Strain Rate Dependent Material Properties, ANTEC, Boston (2005)
  • LIEBING, D., TESSIER, N., BUSH, T. und P. EYERER: Investigations of Surface Properties of Plugs for Thermoforming, PPS-21, Leipzig (2005)
  • WOICKE, N., WAGNER, T. und P. EYERER: Selective Laser Sintering of High Temperature Resistant Thermoplastic Polymers, PPS-21, Leipzig (2005)
  • RODRÍGUEZ, A. und P. EYERER: Experimentelle und theoretische Untersuchungen zum mechanischen Verhalten von Polyamid mit Schädigung, 10. Problemseminar "Deformation und Bruchverhalten von Kunststoffen", Merseburg, 2005
  • KEUERLEBER, M., WOICKE, N., RAISCH, S.R. und P. EYERER: Temperature and Strain Rate Dependent Simulation of High Speed Tensile Tests of I-PP, Journal of Polymer Engineering, Vol. 25, No. 5 (2005)
  • GÖSCHEL, U., GEIER, S., FRITZ, U. und G. BUTH: Effect of additives and mechanical stress on crystal formation in polyamide 6 (project PX 04-005) ANKA Synchrotron Facility Karlsruhe, Annual Report 2005
  • LIEBING, D., TESSIER, N., BUSH, T. und P. EYERER: Investigation of Surface Properties of Pre-Stretching Plugs; Thermoforming Quarterly, 24(4), 2005
  • MAKISHI, C., WOLF, M.-A., WARBURG, N., SHIBASAKI, M. und P. EYERER: Thin-Film Solar Cells - Sustainability Decision Support in Parallel to Recycling Process Development, Rio 5 World Climate & Energy Event, Rio de Janeiro, Brazil, February 2005
  • MAKISHI, C., FALTENBACHER, M., FISCHER, M., WOLF, M.-A., EYERER, P. und M. BINDER: LCA of Fuel Cell Technology for Urban Transportation System in Europe and Australia, Rio 5 World Climate & Energy Event, Rio de Janeiro, Brazil, February 2005.
  • Barthel, L.-P., Wolf, M.-A., Makishi, C. und P. Eyerer: Social aspects for quantifying advantages of renewable energy carriers. Rio 5 World Climate & Energy Event, Rio de Janeiro, Brazil, February 2005
  • WOLF, M.-A., FISCHER, M., FALTENBACHER, M., WARBURG, N., SCHULLER, O. und P. EYERER: Quantifying the Life Cycle Sustainability of renewable energy carriers. Rio 5 World Climate & Energy Event, Rio de Janeiro, Brazil, February 2005
  • FISCHER, M. und M. FALTENBACHER: "Environmental Analysis of the Operation Phase of Hydrogen Fuel Cell Buses", TAE - 5th International Colloquium Fuels, Ostfildern, January 12 - 13, 2005
  • FISCHER, M., WOLF, M.-A., SEIDEL, U. und P. EYERER: "Renewable Resources and Agricultural Products under Life Cycle View", CILCA 2005, San Jose, April 27th, 2005
  • BARTHEL, L., FISCHER, M. und P. EYERER: Ascertaining of Social Process Data for Use in Life Cycle Engineering, CILCA 2005, San Jose, April 25 - 28, 2005
  • PFLIEGER, J., FISCHER, M. und P. EYERER: "The contribution of Life Cycle Assessment to global sustainability reporting of organizations", Management of Environmental Quality, An International Journal, Vol. 16 No. 2, 2005, Emerald Group Publishing Limited, 1477-7835
  • FLORIN, H., BETZ, M. und J. PFLIEGER: "LCA Work in the Metal Industry: Requirements and Solutions", CILCA 2005, San Jose, April 25 - 28, 2005
  • PFLIEGER, J., BETZ, M. und L. ABOUSSOUAN: "Tools and Methods for LCA Work at Metal Associations", Second International Conference Sustainable Development Indicators in the Minerals Industry, May 18 - 20, 2005 in Aachen, Germany
  • M. FALTENBACHER: Life Cycle Assessment the hydrogen infrastructure in the CUTE, ECTOS & STEP projects 2005, März 2005, Triest
  • WARBURG, N., BRAUNE, A., EYERER, P., HERRMANN, C. und N. GALLON: Environmental indicators for ICT products - A practical approach based on four steps, 2005 International Symposium on Electronics & the Environment, May 16 - 19, 2005, New Orleans, LA
  • SHIBASAKI, M., WARBURG, N., EYERER, P., SPRINGER, J. und K. WÖRSING: SENSE - Sustainability and Recycling of thin-film modules - Analysis, Development, Improvements, 20th European Photovoltaic Solar Energy Conference and Exhibition, June 6 - 10, 2005, Barcelona, Spain
  • BRAUNE, A., REBITZER, G. und D. HUNKELER: Adapting LCA to the Needs and Constraints of the User: A Case Study on Waste Water Treatment Viewed from Different Angles, SETAC Case Study Symposium 2005, January 10 - 11, 2005, Bologna, Italy
  • WARBURG, N., BRAUNE, A., EYERER, P., FRANKL, P. und E. MENICHETTI: Life Cycle Assessment (LCA): Methodology and Basis for the Development of Environmental Indicators, EPIC-ICT Workshop CeBIT 2005, March 15, 2005, Hanover, Germany
  • BRAUNE, A. NAYLOR, D.J., PFLIEGER, J. und P. EYERER: A New Internet e-learning Resource on Sustainability, 11th Annual International Sustainable Development Research Conference, June 6 - 8, 2005, Helsinki, Finland
  • KREISSIG, J., BRAUNE, A. und W. TRINIUS: Life Cycle Costing Model of Buildings - Decision Support for Sustainable Construction (Poster), SETAC Europe 15th Annual Meeting, May 22 - 26, 2005, Lille France
  • BARTHEL, L., KUPFER, T., WOLF, M. A. und P. EYERER: Integrated R&D Decision Support for the Chemical Industry, SETAC Europe 15th Annual Meeting, Mai 22 - 26, 2005, Lille, France
  • BARTHEL, L.,  WOLF, M. A. und P. EYERER: Methodology of Life Cycle Sustainability for Sustainability Assessments, 11th Annual International Sustainable Development Research Conference (AISDRC), 6. - 8. Juni 2005, Helsinki, Finland
  • BARTHEL, L.-P. 1, GEDIGA, J.2,  WARTHMANN, W. 3, LAMM, A. 3, und M. 2  RUSS: Analysis of Vehicle Hybridisation and Comparison of NiMH- and LiMn2O4-Cell Manufacturing, Advanced Automotive Battery Conference - 05 (AABC), 15. - 17. Juni 2005, Honolulu, USA
  • O. SCHULLER: Life Cycle Assessment of energy production by means of fuel cell (illustrated by CUTE, ECTOS & STEP), 11. - 12. Juli 2005, Istanbul, Türkei
  • WARBURG, N. und C. HERRMANN: Praktische Anwendung von Ecodesign zur Umsetzung der geplanten EuP Richtlinie in der Praxis. 13. FED-Konferenz Elektronik-Design - Leiterplatten - Baugruppen, 22. - 24.09.2005, Fulda
  • M. SHIBASAKI: Thin Film Solar Cells LCA and recycling, IEA PVPS, 20th European Photovoltaic Solar Energy Conference and Exhibition, June 6 - 8, 2005, Barcelona, Spain
  • PFLIEGER, J., BETZ, M. und L. ABOUSSOUAN: LCA work at the international iron and steel institute: Requirements and solutions, LCM Conference 2005, Barcelona, September 5 - 7, 2005
  • PFLIEGER, J., BETZ, M. und L. ABOUSSOUAN: Tools and Methods for LCA Work at Metal Associations; SETAC North America 26th Annual Meeting Baltimore,  November 13 - 17, 2005
  • BRAUNE, A., WARBURG, N. und C. HERRMANN: Stakeholder involvement in EPIC-ICT - An LCA-based EU project affecting the electronics sector; SETAC North America 26th Annual Meeting, Baltimore, November 13 - 17, 2005
  • BINDER, M., BRAUNE, A., FISCHER, M. und P. EYERER: Beyond the Fence Line - How to combine EMS and the life cycle perspective for an efficient data management; SETAC North America 26th Annual Meeting, Baltimore, November 13 - 17, 2005
  • J. PFLIEGER: GaBi 4 Product Portfolio - Fulfilling requirements of industry -; 27thLCA DiscussionForum, Zürich, November 17, 2005
  • SEIDEL, U., BRAUNE, A., FISCHER, M., WARBURG, N. und P. EYERER: Ökobilanzierung von Produkten aus nachwachsenden Rohstoffen, Poster, Innovationsforum Bioraffinerien und biobasierte industrielle Produkte, Potsdam, 2. - 3. November 2005
  • SEIDEL, U. und N. WARBURG: Ökologische Bewertung von Produkten und Prozessen am Beispiel der Umsetzung nachwachsender Rohstoffe zu Kunststoffen, Arbeitskreis Nachhaltigkeit in der Chemie, Dechema Frankfurt, 16. November 2005
  • O. SCHULLER: Life Cycle Assessment Life Cycle Assessment in the CUTE, ECTOS & STEP projects, December 2, 2005, Brescia, Italien
  • GABRIEL, A. und R. BRAUNE: Eco-efficiency analysis: Applications and User contacts, Journal of Industrial Ecology, Volume 9, Number 4, Fall 2005; The MIT Press, 2005
  • SHIBASAKI, M., WARBURG, N. und P. EYERER: Recycling of Thin Film Solar Modules - LCA and ECO2 Case Study, Eco Design 2005: 4th Intern. Symposium on Environmentally Conscious Design and Inverse Manufacturing, Japan 2005
  • SHIBASAKI, M., WARBURG, N. und P. EYERER: Directives and Legislations - Recycling and Reuse of Products, 4th Intern. Symposium on Environmentally Conscious Design and Inverse Manufacturing, Japan 2005
  • M. FALTENBACHER: LCA of different Bus Systems in the context of the European CUTE Projekt, Perth, Australien, Nov. 2005
  • FALTENBACHER, M. und R. ILG: LCA of the hydrogen infrastructure and FC buses in Europe & Western Australia - An overview, Hobart, Australien, Nov. 2005
  • LUTZ , W.und U. GÖSCHEL: Verbesserte Wärmeformbeständigkeit thermoplastischer Mehrphasenwerkstoffe durch kontrolliertes Kristallwachstum DECHEMA, Abschlussbericht, Projekt Kennziffer 2459, Juni 2005
  • LUTZ, W und U. GÖSCHEL: Improved heat stability of thermoplastic multi-phase materials by means of controlled crystal growth. (Germ.) DECHEMA, Abschlussbericht, Projekt Kennziffer 2459, June 2005

 

Die Abteilungsleiter

Dieses Bild zeigt Felix Baumgärtner

Felix Baumgärtner

Dr.-Ing.

Abteilungsleiter Werkstofftechnik / Stellv. Leiter akkreditiertes Prüflabor

Dieses Bild zeigt Johannes Kaiser

Johannes Kaiser

M. Sc.

Oberingenieur

Dieses Bild zeigt Alptekin Celik

Alptekin Celik

Dr.-Ing.

Abteilungsleiter Verarbeitungstechnik

Zum Seitenanfang